Read Panasonic KX-FT912RU-B / KX-FT914RU-B / KX-FT912UA-B / KX-FT914UA-B Service Manual online
1
Open the cover by pressing the cover open button (
).
2
Install the recording paper.
3
Insert the leading edge of the paper into the opening above the
thermal head (
thermal head (
).
4
Pull the paper out of the unit.
•
•
•
•
Make sure that there is no slack in the paper roll.
5
Close the cover securely by pushing down on both sides.
6
KX-FT912RU-B/UA-B
Press [FAX/START], tear off the excess paper by pulling it
towards you.
Press [FAX/START], tear off the excess paper by pulling it
towards you.
6
KX-FT914RU-B/UA-B
Press [FAX/START] to cut the paper.
Press [FAX/START] to cut the paper.
Note:
•
•
•
•
If the paper is secured with glue or tape, cut approximately
15 cm from the beginning of the roll before installing it.
15 cm from the beginning of the roll before installing it.
•
•
•
•
When the power cord is connected, a message is printed
each time the cover is opened then closed. If the recording
paper is installed upside down, the massage will not be
printed. Install the paper correctly.
each time the cover is opened then closed. If the recording
paper is installed upside down, the massage will not be
printed. Install the paper correctly.
•
•
•
•
For accessory information. Refer to OPTIONAL
ACCESSORIES (P.10).
ACCESSORIES (P.10).
3.3.3. RECORDING PAPER
16
KX-FT912RU-B / KX-FT914RU-B / KX-FT912UA-B / KX-FT914UA-B
Click on the first or last page to see other KX-FT912RU-B / KX-FT914RU-B / KX-FT912UA-B / KX-FT914UA-B service manuals if exist.