Read Panasonic KX-FT57E Service Manual online
|
15
|
INTRODUCTION
KX-FT57E
2. Installing the recording paper
1
Open the back lid by lifting up the tabs located
on the both sides.
on the both sides.
Install a recording paper roll.
•
Make sure that the shiny side of the paper is
facing down.
Note:
•
Only use the included roll of paper or specified recording paper, or the print quality may be affected and/or
excessive thermal head wear may occur.
4
Close the back lid by gently pressing down on both
ends.
ends.
Insert the leading edge of the recording paper
between the recording paper roller and the silver
plate, then pull it a few centimeters out of the unit.
between the recording paper roller and the silver
plate, then pull it a few centimeters out of the unit.
•
Make sure that there is no slack in the paper roll.
incorrect
correct
Tab
Recording paper roller
Silver plate
3. Installing the paper stacker
Install the paper stacker.
Paper stacker
3
2
•
If the paper is secured with glue or tape, cut
approx. 150 mm from the beginning of the roll.
Click on the first or last page to see other KX-FT57E service manuals if exist.