Read Panasonic KX-FT33 / KX-FT35 / KX-FT37 / KX-FT42BX / KX-FT46BX Service Manual Supplement online
1 REPLACEMENT PARTS LISTS
1.1. REFERENCE CHART
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in 1.2. ORIGINAL AND NEW PARTS
COMPARISON LIST(S).
1. Improve performance
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in 1.2. ORIGINAL AND NEW PARTS
COMPARISON LIST(S).
1. Improve performance
Remarks:
2. Change of material or dimension
*a: To improve the electric conduction.
3. To meel approved specification
*b: For prevention of static electricity.
4. Standardization
*c: To facilitate the production process.
5. Addition
*d: To share the part with other models.
6. Deletion
*e: To modify the parameter for inspection on the production line.
7. Correction
*f: To improve cutter’s performance
8. Other
*g: The factory for production is transferred from Japan to China. (The place of production described
in the name plate is changed from “Made in Japan” to “Made in China”.)
in the name plate is changed from “Made in Japan” to “Made in China”.)
Interchangeability Code
**The following items (V-Z) indicate the interchangeability. See the “Notes” column for each part in 1.2. ORIGINAL AND NEW PARTS
COMPARISON LIST(S).
**The following items (V-Z) indicate the interchangeability. See the “Notes” column for each part in 1.2. ORIGINAL AND NEW PARTS
COMPARISON LIST(S).
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Late (after change)
Original or new parts may be used in early or late production set.
Use original parts until exhausted, then stock new parts.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
production sets only. Stock both original and new parts.
Z Other
Note:
Alphabets in the “Remarks” column in the following lists correspond to the alphabets in the “Remarks” in 1.1. REFERENCE
CHART.
CHART.
1.2. ORIGINAL AND NEW PARTS COMPARISON LIST(S)
1.2.1. KX-FT33YG
Ref No.
Part No.
Part Name & Descriptions
Pcs/
Set
Remarks
Notes
Original Part No.
New Part No.
CABINET AND ELECTRICAL SECTION
25
25
PFUS1095Z
PFUS1095X
OPEN EARTH
1
*a
1 W
37
PFMH1046Z
PFMH1046Y
SHADING PLATE
1
*b
1 W
93
PFDX1010Z
PFDX1010Y
CUTTER
1
*d
4
V
97
---------------------------
PFHE1024Z
SPACER,
CUTTER
(See
2.1.
UPPER
CABINET SECTION.)
1
*f
1
Y
104
PFAS50PTC01Y
PFWE1FT31BX
SPEAKER
ASS’Y
(See
2.2.
LOWER
CABINET / P.C.B. SECTION.)
1
*d
4
Y
104-1
---------------------------
PFUS1165Z
SPRING, SPEAKER
1
*d
4
Y
106
PFUS1089Z
---------------------------
0
Deleted
108
PFMD1024Z
PFMD1024Y
FRAME, BOTTOM
1
*d
1
V
156
---------------------------
PFHX1031Z
SHEET,
BRAKE
(See
2.3.
MOTOR
SECTION.)
1
*f
1
Y
ACCESSORIES AND PACKING MATERIALS
P1
P1
PFPK1450Z
PFPK1484Z-J
GIFT BOX
1
*g
8
Y
FIXTURES AND TOOLS
EC5
EC5
PQZZ2K6Z
PFZZ12K1Z
CONNECTOR, 12PINS
1
--------
7 ---
EC9
PFZZ12K1Z
PQZZ12K4Z
CONNECTOR, 12PINS
1
--------
7 ---
2
KX-FT33 Series / KX-FT35 Series / KX-FT37 Series / KX-FT42BX / KX-FT46BX
Click on the first or last page to see other KX-FT33 / KX-FT35 / KX-FT37 / KX-FT42BX / KX-FT46BX service manuals if exist.