Read Panasonic KX-FPC91 Service Manual online
Once aligned, please perform the following procedure.
1. Disconnect all equipment and solder connections. Use
solder wick to clean up any solder you added.
2. Install the keypad membrane on top of the HANDSET keys.
3. Install the HANDSET P.C.Board.
4. Solder speaker wires back onto the P.C.Board observing
correct polarity.
5. If you will align Item (C) RX Input in BASE UNIT, then solder
a short wire across the MIC leads. Remember to unsolder
this wire after you completed the BASE UNIT alignment.
this wire after you completed the BASE UNIT alignment.
6. Insert antenna into the case.
7. Install antenna and top P.C.Board mounting screws.
8. Install case back and bottom mounting screws.
9. DO NOT INSTALL THE BATTERY AT THIS TIME!!!!!!
126
KX-FPC91
Click on the first or last page to see other KX-FPC91 service manuals if exist.