Read Panasonic KX-FP343RU / KX-FP363RU Service Manual Supplement online
1 REPLACEMENT PARTS LISTS
1.1. REFERENCE CHART
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS
COMPARISON LISTS .
1. Improve performance
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS
COMPARISON LISTS .
1. Improve performance
Remarks:
*a: To increase the strength.
*b: To share the parts with other models.
*c: To enhance the quality.
*d: Sales section’s request.
*e: Add the Voice Contact feature.
*f: Other
*a: To increase the strength.
*b: To share the parts with other models.
*c: To enhance the quality.
*d: Sales section’s request.
*e: Add the Voice Contact feature.
*f: Other
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code
**The following items (V-Z) indicate the interchangeability. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS .
**The following items (V-Z) indicate the interchangeability. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS .
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Late (after change)
Original or new parts may be used in early or late production set.
Use original parts until exhausted, then stock new parts.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
production sets only. Stock both original and new parts.
Z Other
Note:
Alphabets in the “Remarks” column in the following lists correspond to the alphabets in the “Remarks” in REFERENCE
CHART.
CHART.
1.2. ORIGINAL AND NEW PARTS COMPARISON LISTS
1.2.1. KX-FP343RU
Change of the Suffix Code
Suffix Code
Reasons of change
A
→
B
To upgrade the ROM version for improvement of the JUNK FAX PROHIBITOR function.
(Program No. is changed from E991RN to E991RP.)
(Program No. is changed from E991RN to E991RP.)
B
→
C
To upgrade the ROM version for addition of the VOICE CONTACT feature.
(Program No. is changed from E991RP to E991RQ.)
(Program No. is changed from E991RP to E991RQ.)
Serial No.Label tells you the suffix code as follows.
Ref No.
Part No.
Part Name & Descriptions
Pcs/Set
Remarks
Notes
Suffix
Original (Old)
New
OPERATION PANEL SECTION
23
23
---------
PFHX1742Z
SHEET, OPERATION COVER
(Refer to OPERATION PANEL SECTION.)
(Refer to OPERATION PANEL SECTION.)
1
*a
1
X
BACK COVER SECTION
67
67
PFUA1042Y
PFUA1042X
CHASSIS, U TURN
1
*a
1
X
LOWER CABINET / P.C.B. SECTION
131
131
PFHX1350Z
PFHX1350Y
SPACER, HEAD SHEET
*1
1
*f
8
Y
MOTOR SECTION
170
170
35S1S15DGNH
L6HAGCLK0006
DC MOTOR, RX
*1
1
*f
8
Y
171
35S1S15DGNF
L6HAGCLK0005
DC MOTOR, TX
*1
1
*f
8
Y
ACCESSORIES AND PACKING MATERIALS
A8
A8
PFQX1840Z
PFQX1840Y
INSTRUCTION BOOK (for Russian) [Change 1]
1
*b
8
X
2
KX-FP343RU / KX-FP363RU
Click on the first or last page to see other KX-FP343RU / KX-FP363RU service manuals if exist.