Read Panasonic KX-FP320G / KX-FM330G Service Manual online
C
B
B
A
A
2
1
A
A
A
A
A
A
A
OPERATION BOARD
LCD
FLEXIBLE CABLE
OPERATION PANEL
COVER
COVER
SEPARATION RUBBER
Pull down the
connector
connector
Remove the
flexible connector
flexible connector
CONNECTOR
CONNECTOR
Ref. No. 4
HOW TO REMOVE THE OPERATION BOARD, LCD AND DOCUMENT GUIDE
Procedure
2
2
4
1) Remove the 9 screws A .
2) Remove the operation panel cover.
3) Remove the 2 screws B .
4) Pull out the 2 connectors and flexible cable.
5) Remove the operation board.
6) Remove the LCD.
7) Remove the 1 screw C .
8) Remove the guide.
2) Remove the operation panel cover.
3) Remove the 2 screws B .
4) Pull out the 2 connectors and flexible cable.
5) Remove the operation board.
6) Remove the LCD.
7) Remove the 1 screw C .
8) Remove the guide.
NOTE:
Install LEAD so that ULTAPE
position of start rolling is on the line
as following figure.
Install LEAD so that ULTAPE
position of start rolling is on the line
as following figure.
NOTE:
Make sure that LEAD is not
on a substrate.
Make sure that LEAD is not
on a substrate.
Don't hold LEAD between an
operation panel and the substrate.
operation panel and the substrate.
GUIDE
GUIDE
127
KX-FP320G / KX-FM330G