Read Panasonic KX-FP143RU (serv.man3) Service Manual Supplement online
1 REPLACEMENT PARTS LIST
1.1. REFERENCE CHART
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS
COMPARISON LIST .
1. Improve performance
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS
COMPARISON LIST .
1. Improve performance
Remarks:
*a: To increase the safety margin.
*b: To share the parts with other models.
*c: To enhance the quality.
*d: Add the Voice Contact feature.
*e: Sales section’s request.
*f: To improve the display error.
*a: To increase the safety margin.
*b: To share the parts with other models.
*c: To enhance the quality.
*d: Add the Voice Contact feature.
*e: Sales section’s request.
*f: To improve the display error.
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code
**The following items (V-Z) indicate the interchangeability. See the “Notes” column for each part in ORIGINAL AND NEW PARTS
COMPARISON LIST .
**The following items (V-Z) indicate the interchangeability. See the “Notes” column for each part in ORIGINAL AND NEW PARTS
COMPARISON LIST .
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Late (after change)
Original or new parts may be used in early or late production set.
Use original parts until exhausted, then stock new parts.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
production sets only. Stock both original and new parts.
Z Other
Note:
Alphabets in the “Remarks” column in the following lists correspond to the alphabets in the “Remarks” in REFERENCE
CHART.
CHART.
1.2. ORIGINAL AND NEW PARTS COMPARISON LIST
Change of the Suffix Code
Suffix Code
Reasons of change
A
→
B
To upgrade the ROM version for addition of the VOICE CONTACT feature.
(Program No. is changed from G151RN to G151RP.)
(Program No. is changed from G151RN to G151RP.)
B
→
C
To upgrade the ROM version for improvement of display error.
(Program No. is changed from G151RP to G151RQ.)
(Program No. is changed from G151RP to G151RQ.)
Serial No.Label tells you the suffix code as follows.
Ref No.
Part No.
Part Name & Descriptions
Pcs/Set
Remarks
Notes
Suffix
Original (Old)
New
CABINET AND ELECTRICAL PARTS
44
44
PFUS1490Z
PFUS1549Z
SPRING
*1
1
*a
8
X
85
PFUS1512Z
PFUS1551Z
SPRING
*1
1
*a
8
X
107
----------
PFHX1778Z
SPACER, BACK TENSION SHEET
*1
1
*a
5
X
ACCESSORIES AND PACKING MATERIALS
A2
A2
PFQX1988Y
PFQX1988X
INSTRUCTION BOOK (for Russian)
1
*e
8
X
A10
PFQX1989Y
PFQX1989X
INSTRUCTION BOOK (for Ukrainian)
1
*e
8
X
DIGITAL BOARD PARTS
IC502
IC502
PFWIFP143RU
PFWIFP143RU1
IC (ROM) [Change 1]
1
*d
8
X
A
→
B
IC502
PFWIFP143RU1
PFWIFP143RU2
IC (ROM) [Change 2]
1
*f
8
X
B
→
C
X501
H0A327200090
PFVCCFS32Z
CRYSTAL OSCILLATOR
S
1
*c
1
X
OPERATION BOARD PARTS
R306
R306
ERJ3GEYJ222
ERG3GEYJ102
RESISTOR, 1k
Ω
1
*c
1
X
2
KX-FP143RU
Click on the first or last page to see other KX-FP143RU (serv.man3) service manuals if exist.