Read Panasonic KX-FLC418RU Service Manual online
10
KX-FLC418RU
3 Specifications
3.1.
Base Unit
*1 Transmission speed depends upon the contents of the pages, resolution, telephone line conditions and capability of the other
party's machine.
*2 Transmission speed is based upon the ITU-T No. 1 Test Chart. (Refer to ITU-T No.1 Test Chart (P.262).) If the capability of the
other party's machine is inferior to your unit, the transmission time may be longer.
*3 If an error occurs during fax reception, such as a paper jam or if the recording paper runs out, the fax and subsequent faxes will
be retained in memory.
*4 Recording time may be reduced by the calling party's background noise.
Note:
party's machine.
*2 Transmission speed is based upon the ITU-T No. 1 Test Chart. (Refer to ITU-T No.1 Test Chart (P.262).) If the capability of the
other party's machine is inferior to your unit, the transmission time may be longer.
*3 If an error occurs during fax reception, such as a paper jam or if the recording paper runs out, the fax and subsequent faxes will
be retained in memory.
*4 Recording time may be reduced by the calling party's background noise.
Note:
• Design and specifications are subject to change without notice.
• The pictures and illustrations in these instructions may vary slightly from the actual product.
Applicable Lines:
Public Switched Telephone Network
Document Size:
Max. 216 mm in width
Max. 600 mm in length
Max. 600 mm in length
Effective Scanning Width:
208 mm
Effective Printing Width:
202mm
Transmission Time
*1
:
Approx. 8 s/page (ECM-MMR)
*2
Scanning Density:
Horizontal:
8 pels/mm
Vertical:
3.85 lines/mm -STANDARD
7.7 lines/mm -FINE/PHOTO/MIXED(PHOTO WITH TEXT)
15.4 lines/mm -SUPER FINE
8 pels/mm
Vertical:
3.85 lines/mm -STANDARD
7.7 lines/mm -FINE/PHOTO/MIXED(PHOTO WITH TEXT)
15.4 lines/mm -SUPER FINE
Photo Resolution:
64-level
Scanner Type:
Contact Image Sensor (CIS)
Printer Type:
Laser printer
Data Compression System:
Modified Huffman (MH), Modified READ (MR), Modified Modified READ (MMR)
Modem Speed:
14,400/12,000/9,600/7,200/4,800/2,400 bps; Automatic Fallback
Operating Environment:
10
°C—32.5°C, 20—70% RH (Relative Humidity)
Dimensions:
Approx. height 218 mm
× width 360 mm × depth 357 mm
Mass (Weight):
Approx. 7.5 kg
Power Consumption:
Standby: Approx. 4.0 W
Transmission: Approx. 12W
Reception: Approx. 240 W
Copy: Approx. 240 W
Maximum: Approx. 950W (When the fuser lamp turns on)
Transmission: Approx. 12W
Reception: Approx. 240 W
Copy: Approx. 240 W
Maximum: Approx. 950W (When the fuser lamp turns on)
Power Supply:
220-240 V AC, 50/60Hz
FAX Memory Capacity
*3
:
Approx. 150 pages of memory transmission.
Approx. 40 pages of memory reception.
(Based on ITU-T No. 1 Test Chart in standard resolution.)
Approx. 40 pages of memory reception.
(Based on ITU-T No. 1 Test Chart in standard resolution.)
Voice memory capacity
*4
:
Approx. 15 minutes of recording time
Copy memory capacity:
Approx. 80 pages (Based on the ITU-T No. 1 Test Chart in fine resolution.)
Laser diode properties:
Laser output: Max. 5 mW
Wave length: 760 nm—800 nm
Emission duration: Continuous
Wave length: 760 nm—800 nm
Emission duration: Continuous
LED light of CIS properties:
LED radiation output: Max. 1 mW
Wavelength: Green 520 nm typ.
Emission duration: Continuous
Wavelength: Green 520 nm typ.
Emission duration: Continuous
Copy Speed:
Approx 10 cpm (copies per minute)
Printing Resolution:
600
× 600 dpi
Product life:
2 hundreds-thousands (except drum unit, toner cartridge)
Click on the first or last page to see other KX-FLC418RU service manuals if exist.