Read Panasonic KX-FLC413UA (serv.man3) Service Manual Supplement online
2
KX-FLC413UA
1 CHANGES
1.1.
Replacement Parts List
JS
KXFLC413UA
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS.
1. Improve performance
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS.
1. Improve performance
Remarks:
*a : To enhance the quality
*m : Discontinued (To be replaced with a new part)
*1 : All parts must be changed at the same time
*a : To enhance the quality
*m : Discontinued (To be replaced with a new part)
*1 : All parts must be changed at the same time
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code (Symbols: B) Following V-Z interchange abilities are indicated on the Notes in the bottom column.
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
production sets only. Stock both original and new parts.
Z Other
Ref. No.
Part No.
Part Name & Description
Pcs
Remarks
Notes
Time of change
(Suffix)
Original (Old)
New
Fuser Section
193
193
PFHR1408Z
PFHR1408Y
LEVER
1
*a
8
V
Digital Board Parts
C182
C182
ECUV1H120JCV
ECUV1H150JCV
CAPACITOR, 15pF
1
*m, *1
8
Y
R174
ERJ3GEYJ470
ERJ3GEYJ152
RESISTOR, 1.5k
1
*m, *1
8
Y
X102
H0A240500005
H0A240500010
CRYSTAL OSCILLATOR
1
*m, *1
8
Y
Display
