KX-FLC413RU (serv.man3) - Panasonic Fax Service Manual Supplement (repair manual)

kx-flc413ru (serv.man3) service manual supplement
Model
KX-FLC413RU (serv.man3)
Pages
15
Size
1.88 MB
Type
PDF
Document
Service Manual Supplement
Brand
Device
Fax / COMPACT LASER FAX
File
kx-flc413ru-sm3.pdf
Date

Read Panasonic KX-FLC413RU (serv.man3) Service Manual Supplement online

ORDER NO. KMF1008112SE
Compact Laser Fax
Model No.
KX-FLC413RU
(for Russia)
TABLE OF CONTENTS
PAGE
1 REPLACEMENT PARTS LIST--------------------------------- 2
1.1. REFERENCE CHART------------------------------------ 2
1.2. Introduction-------------------------------------------------- 3
1.3. ORIGINAL AND NEW PARTS COMPARISON
LISTS --------------------------------------------------------- 3
2 NEW TYPE VERSION-------------------------------------------- 4
2.1. HVPS (High Voltage Power Supply)
SECTION ---------------------------------------------------- 4
2.2. TROUBLESHOOTING DETAILS ---------------------- 6
2.3. Schematic Diagram --------------------------------------13
2.4. Printed Circuit Board-------------------------------------14
2.5. Exploded View and Replacement Parts List-------15
Please file and use this supplement manual together with the service manual for Model No.KX-FLC413RU,
Order No.KMF0611074CE.
2
KX-FLC413RU
1 REPLACEMENT PARTS LIST
1.1.
REFERENCE CHART
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS 
COMPARISON LISTS.
1. Improve performance
Remark: 
*a : To enhance the quality.
Notes: 
(*1)
: When HVPS is an old (original) type, N0GG4E000005.
(*2): When HVPS is a new type, EUK1MNA90HA.
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
3
KX-FLC413RU
1.2.
Introduction
High Voltage Power Board (HVPS) has two kinds, a new type and an old (original) type. When replacing the HVPS or the parts on
the HVPS, first confirm if HVPS is a new type or an old type. A new type and an old type should be proceeded respectively with a
service according to each procedure.
If it is a new one, see the NEW TYPE VERSION (P.4). If it is an old one, see the service manual for KX-FLC403RU (Order
No.KMF0611074CE).
The new type of HVPS and the old one have different parts respectively as shown above.
When ordering, make sure you order the correct parts.
For the new one, see the Lower Main Cabinet Section (2) (P.15).
For the old one, see the parts list of service manual for KX-FLC413RU (Order No.KMF0611074CE)
1.3.
ORIGINAL AND NEW PARTS COMPARISON LISTS
Old (Original) type
New type
How to Distinguish Old (original)Type from New Type (HVPS)
(N0GG4E000005)
(EUK1MNA90HA)
Output terminal
Molding type
transformer
Output terminal
Open type
transformer
䌓䌗ICH
Position of HVPS Parts No.
Name of parts
Ref.No.
Old (original) type
New type
HVPS
PCB7
N0GG4E000005
EUK1MNA90HA
Connector, 8pin
232
PFJS08N95Z
PNJS81027Z
Spring, charge
274
PFUS1662Z
PNUS1081Z
Ref. No.
Part No.
Part Name & Description 
Pcs/
Set
Remarks
Notes
Time of Change
Original (Old)
New
(Suffix)
Lower Main Cabinet Section (1)
232
PFJS08N95Z
PFJS08N95Z
CONNECTOR, 8PIN  only old type  (*1)
1
---
---
---
D or previous D
232
----------
PNJS081027Z
CONNECTOR, 8PIN  only new type  (*2)
1
*a
1
Y
E or later
Lower Main Cabinet Section (2)
274
PFUS1662Z
PFUS1662Z
COIL SPRING  only old type  (*1)
1
---
---
---
D or previous D
274
----------
PNUS1081Z
COIL SPRING  only new type  (*2)
1
*a
1
Y
E or later
Digital Board Parts
PCB1
PFWP1LC413RU PFWP1LC413RU DIGITAL BOARD ASS'Y
1
---
---
---
D or previous D
PCB1
----------
PFWP1C413RUA DIGITAL BOARD ASS'Y
1
*a
1
Y
E or later
IC105
PFWI1C413RU2
PFWI1C413RU3
IC (ROM)
[Program Ver.G801RQ
→G801RR]
1
*a
1
Y
D to E
High Voltage Power Supply Board Parts
PCB7
N0GG4E000005
N0GG4E000005
HIGH  VOLTAGE POWER BOARD ASS'Y
(RTL) only old type  (*1)  
1
---
---
---
D or previous D
PCB7
----------
EUK1MNA90HA
HIGH VOLTAGE POWER BOARD ASS'Y
(RTL) only new type  (*2)  
1
*a
1
Y
E or later
4
KX-FLC413RU
2 NEW TYPE VERSION
2.1.
HVPS (High Voltage Power Supply) SECTION
2.1.1.
HVPS SPECIFICATION
[Changed from original section “7.15.1. HVPS Specification”]
2.1.2.
CHG-BIAS (Charge BIAS)/GRID/Unit
[Changed from original section “7.15.2. CHG-BIAS (Charge BIAS)/GRID/Unit”]
2.1.3.
DEV DC BIAS UNIT
[Added into original section “7.15. HVPS (High Voltage Power Supply) Section”]
7.15.1. HVPS Specification
There is one terminal for transcription output and + and - are switched to be output.
Charge (CHG)
Grid
Developing DC
Transfer (TRA-)
Transfer (TRA+)
Output Characteristics
Constant current
Constant voltage
Constant voltage
Constant current
(Variable)
Constant voltage
Nominal Output Voltage 4.25kV
475±18V
220V±15V
100M
: (-800V)
800V±100V
Nominal Output Current 180±15
PA
(180
PA)
---------
-10.4
PA±1PA
PWM 50%
(at 100M
:)
1000M
:
(0.8
PA)
Load Range
21.0M
:
100M
:~2000M:
62.5~312M
:
10M
:~1000M:
Constant Current
Range
-2500V~-500V
7.15.2. CHG-BIAS (Charge BIAS)/GRID/Unit
When IC101 turns on the transistor Q210. CHG REM becomes “L”, and Charge BIAS(180
PA) is output from CHG OUTPUT.
GRID BIAS is generated by the current flowing in the GRID circuit via charge wire and GRID.
7.15.3. DEV DC BIAS UNIT
If CHG REM is “L”, transistor Q209 turns on from the IC101 and the DEV DEM becomes “L”, the developing voltage(+220V) is
out put from DEV terminal.
Page of 15
Display

Download Panasonic KX-FLC413RU (serv.man3) Service Manual Supplement

Here you can read online and download Panasonic KX-FLC413RU (serv.man3) Service Manual Supplement in PDF. KX-FLC413RU (serv.man3) service manual supplement will guide through the process and help you recover, restore, fix, disassemble and repair Panasonic KX-FLC413RU (serv.man3) Fax. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.