Read Panasonic KX-FL513RU (serv.man2) Service Manual Supplement online
1 REPLACEMENT PARTS LISTS
1.1. REFERENCE CHART
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS
COMPARISON LISTS .
1. Enhance performance
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS
COMPARISON LISTS .
1. Enhance performance
Remarks:
*a To avoid to break sensor IC when installing CIS.
*b: To enhance paper stack performance in high temperature and humidity condition.
*c To secure torquemargin of the main motor.
*d To enhance the performance of the Junk Fax Prohibitor.
*a To avoid to break sensor IC when installing CIS.
*b: To enhance paper stack performance in high temperature and humidity condition.
*c To secure torquemargin of the main motor.
*d To enhance the performance of the Junk Fax Prohibitor.
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code
**The following items (V-Z) indicate the interchangeability. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS .
**The following items (V-Z) indicate the interchangeability. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS .
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Late (after change)
Original or new parts may be used in early or late production set.
Use original parts until exhausted, then stock new parts.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
production sets only. Stock both original and new parts.
Z Other
Note:
Alphabets in the “Remarks” column in the following lists correspond to the alphabets in the “Remarks” in REFERENCE
CHART.
CHART.
1.2. ORIGINAL AND NEW PARTS COMPARISON LISTS
Change of the Suffix Code
Suffix Code
Reasons of change
A
→
B
•
•
•
•
To enhance the performance of the Junk Fax Prohibitor.
Program No. is changed from G071RP to G071RQ.[PFWIFL513RU1]
Change of the Suffix Code
Suffix Code
Reasons of change
B
→
C
•
•
•
•
To enhance document feed performance.
Serial No.Label tells you the suffix code as following.
Ref No.
Part No.
Part Name & Descriptions
Pcs/Set
Remarks
Notes
Suffix
Original Part No.
New Part No.
CABINET AND ELECTRICAL PARTS
33
33
PFDN1066Z
PFZRFL511M
FEED ROLLER KIT
1
1
X
B
→
C
35
PFHG1104Y
Not used
SEPARATION RUBBER
0
6
---
B
→
C
65
PFUG1017Z
PFUG1017Y
GUIDE,MIDDLE
1
*a
1
X
90
PFKE1029Y1
PFKV1075Z1
COVER,TRAY
1
7
---
91
PFKV1075Z1
PFKE1029Y1
TRAY, PICK UP ROLLER
1
7
---
140
PFDR1043Z
PFDR1043Y
ROLLER, SUPPORT EJECT
2
*b
1
X
143
PFHG1187Z
Not used
0
6
---
DIGITAL BOARD PARTS
IC607
IC607
PFWIFL513RU
PFWIFL513RU1
IC(ROM)
1
*d
1
X
A
→
B
C615
ECUV1C104ZFV
ECUV1A224KBV
CAPACITOR,0.22µF
1
*c
1
X
C619
ECUV1C104ZFV
ECUV1A224KBV
CAPACITOR,0.22µF
1
*c
1
X
C633
ECUV1C104ZFV
ECUV1A224KBV
CAPACITOR,0.22µF
1
*c
1
X
2
KX-FL513RU
Click on the first or last page to see other KX-FL513RU (serv.man2) service manuals if exist.