KX-FC965RU - Panasonic Fax Service Manual (repair manual). Page 124

124

KX-FC965RU-T

Refer to JOURNAL 2 in Printout Example (P.125).
Journal 2 displays the additional detailed information about the last 30 communications.

Descriptions:
(1) RCV. MODE
Indicates which receive mode the unit was in when the unit received a fax message.
This information is also displayed when the unit transmitted a fax message.

(2) SPEED
Indicates the speed of the communication. If multiple pages are transmitted or received, it indicates the last page’s communication
speed. If there is a communication error, "?" is displayed.

(3) RESOLUTION
Indicates the resolution of the communication. If multiple pages are transmitted or received, it indicates the last page’s resolution. If
there is a communication error, "?" is displayed.

(4) RCV-TRIG. (CNT.)
Indicates the trigger that causes the unit to switch to the fax receive mode. The available options are listed in JOURNAL 2 in Print-
out Example (P.125). The values in parentheses indicate how many times the trigger has been used. (For example, "0003" means
three times.)

→MEMORY

Indicates the reason why the unit received a fax message in memory.
If you look at No.11 in the JOURNAL 2 in Printout Example (P.125), it shows the fax message was received in memory due to
"PAPER OUT" error.

NO RESPONSE DISAPPEARED ON JOURNAL
The "NO RESPONSE DISAPPEARED ON JOURNAL" displays the information about the last 10 communications terminated by
"No Response". (Some of the communications terminated by "No Response" were not displayed in the JOURNAL.)
When a fax transmission cannot be performed because the other party’s unit is set to the TEL mode, "No response" will be printed.

No.

Display

Function

1

FAX MODE

Means the unit received a fax message in the FAX mode.

2

MAN RCV

Means the unit received a fax message by manual operation.

3

FRN RCV

Means the unit received a fax message by friendly signal detection.

4

VOX

Means the unit detected silence or no voice.

5

RMT DTMF

Means the unit detected DTMF (Remote Fax activation code) entered remotely.

6

PAL DTMF

Means the unit detected DTMF (Remote Fax activation code) entered by a parallel connected tele-
phone.

7

TURN-ON

Means the unit started to receive after 20 rings. (Remote Turn On: Service Code #573)

8

TIME OUT

Means the unit started to receive after Ring Time Out in the EXT-TAM or TEL/FAX mode.

9

IDENT

Means the unit detected Ring Detection.

10

CNG OGM

Means the unit detected the CNG while it was sending the Dummy Ring Back Tone in the TEL/FAX
mode.
OR 
Means the unit detected the CNG while it was sending the OGM in the ANS/FAX mode.

11

CNG ICM

Means the unit detected the CNG while it was recording the ICM in the ANS/FAX mode.