Read Panasonic KX-FC195RU-G (serv.man3) Service Manual Supplement online
1 REPLACEMENT PARTS LISTS
1.1. REFERENCE CHART
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS
COMPARISON LISTS .
1. Improve performance
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS
COMPARISON LISTS .
1. Improve performance
Remarks:
*a: To prevent document jam at CIS area.
*b: To facilitate the production supply.
*c: To correct error writing.
*a: To prevent document jam at CIS area.
*b: To facilitate the production supply.
*c: To correct error writing.
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code
**The following items (V-Z) indicate the interchangeability. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS .
**The following items (V-Z) indicate the interchangeability. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS .
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Late (after change)
Original or new parts may be used in early or late production set.
Use original parts until exhausted, then stock new parts.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
production sets only. Stock both original and new parts.
Z Other
Note:
Alphabets in the “Remarks” column in the following lists correspond to the alphabets in the “Remarks” in REFERENCE
CHART.
CHART.
1.2. ORIGINAL AND NEW PARTS COMPARISON LISTS
Ref No.
Part No.
Part Name & Descriptions
Pcs/Set
Remarks
Notes
Suffix
Original (Old)
New
CABINET AND ELECTRICAL PARTS
44
44
PFYMFC195RU
PFKM1084Y1
CABINET BODY
(Refer to UPPER CABINET SECTION)
(Refer to UPPER CABINET SECTION)
1
*b
1
X
49
----------
PFHX1692Z
INSULATOR, CIS SHEET
1
*a
5
X
HANDSET BOARD PARTS
IC1
IC1
C2HBAK000003
C2HBAK000005
IC
1
4
V
E102
PQWLA141E
----------
LCD ASS’Y
1
*c
6
---
2
KX-FC195RU-G
13
KX-FC195RU-G
Click on the first or last page to see other KX-FC195RU-G (serv.man3) service manuals if exist.