Read Panasonic DMP-BDT130EE / DMP-BDT330EE Service Manual online
8
2.5.
Static Electricity Protection Measures
• The laser diode in the traverse unit (optical pick-up) may break down due to potential difference caused by static electricity of
clothes or human body.
So, be careful of electrostatic breakdown during repair of the traverse unit (optical pick-up).
So, be careful of electrostatic breakdown during repair of the traverse unit (optical pick-up).
2.6.
Ground for electrostatic breakdown prevention
• As for parts that use optical pick-up (laser diode), the optical pick-up is destroyed by the static electricity of the working environ-
ment.
Repair in the working environment that is grounded.
Repair in the working environment that is grounded.
2.6.1.
Work table grounding
• Put a conductive material (sheet) or steel sheet on the area where the traverse unit (optical pick-up) is placed, and ground the
sheet.
2.6.2.
Human body grounding
• Use the anti-static wrist strap to discharge the static electricity from your body.
2.6.3.
When exchange the BDP Drive
• Before remove the ESD prevention bag, make sure to use the anti-static wrist strap to discharge the static electricity when
replace the BDP Drive.
Note:
Note:
The ESD prevention bag is used to replace the original short-circuit point.
It can be removed while placing the BDP Drive.
It can be removed while placing the BDP Drive.
Click on the first or last page to see other DMP-BDT130EE / DMP-BDT330EE service manuals if exist.