Read Panasonic DMP-BD75EB / DMP-BD75EE / DMP-BD75EF / DMP-BD75EG Service Manual online
14
6 Operating Instructions
6.1.
Taking out the Disc from Drive Unit when the Disc cannot be ejected by
OPEN/CLOSE button
OPEN/CLOSE button
6.1.1.
When the power can be turned off.
6.1.1.1.
When the power can be turned off.
1. Turn the unit off, then press and hold [OK], [Yellow] and [Blue] buttons on the remote control simultaneously for 5 seconds.
- “00 RET” is displayed on the unit’s LED display.
2. Repeatedly press the right cursor button on the remote Control or Power button on the unit until “06 FTO” is displayed on the
unit's LED display.
3. Press [OK] button on the remote control or [OPEN/CLOSE] button on the unit.
6.1.1.2.
When the power can not be turned off.
Press [POWER] button on the unit for over 4 seconds to turn off the power forcibly, and step 1 to 3 above.
6.1.2.
When the Forcible Disc Eject can not be done.
1. Turn off the power and pull out AC cord.
2. Remove the Top Case.
3. Put the unit so that bottom can be seen.
4. Insert paper clips, etc. into the hole on the bottom of Drive Unit and slide the paper clips, etc. in the direction of the arrow to
2. Remove the Top Case.
3. Put the unit so that bottom can be seen.
4. Insert paper clips, etc. into the hole on the bottom of Drive Unit and slide the paper clips, etc. in the direction of the arrow to
eject tray slightly.
5. Pull the unit upward, and push out Tray by paper clips, etc. or minus screw driver (small).
Click on the first or last page to see other DMP-BD75EB / DMP-BD75EE / DMP-BD75EF / DMP-BD75EG service manuals if exist.