Read Panasonic DMP-BD60EG / DMP-BD60EB / DMP-BD60EE / DMP-BD60EF / DMP-BD80EG / DMP-BD80EB Service Manual online
13
7.1.2.
Special Modes Setting
UNSUP-
PORT
PORT
Unsupported disc error
*An unsupported format disc was played,
although the drive starts normally.
*The data format is not supported, although
the media type is supported.
*Exceptionally in case of the disc is dirty.
although the drive starts normally.
*The data format is not supported, although
the media type is supported.
*Exceptionally in case of the disc is dirty.
This disc is
incompatible.
incompatible.
Display for 5 seconds.
The character indication flows
sideways.
sideways.
NO READ Disc read error
*A disc is flawed or dirty.
*A poor quality failed to start.
*The track information could not be read.
*A poor quality failed to start.
*The track information could not be read.
Cannot read.
Please check the
disc.
Please check the
disc.
HARD
ERR
ERR
Drive error
The drive detected a hard error.
DVD drive error.
Display for 5 seconds.
The character indication flows
sideways.
sideways.
SELF
CHECK
CHECK
Restoration operation
Since the power cord fell out during a power
failure or operation, it is under restoration
operation.
*It will OK, if a display disappears automati-
cally. If a display does not disappear, there is
the possibility that defective Digital P.C.B. /
BDP drive.
failure or operation, it is under restoration
operation.
*It will OK, if a display disappears automati-
cally. If a display does not disappear, there is
the possibility that defective Digital P.C.B. /
BDP drive.
No display
The character indication flows
sideways.
sideways.
PLEASE
WAIT
WAIT
Unit is in termination process
Unit is in termination process now.
BYE
is displayed and power will be turned off.
No display
The character indication flows
sideways.
sideways.
UNFOR-
MAT
MAT
Unformatted disc error
You have inserted an unformatted BD-RE/
BD-R/DVD-RAM/DVD-RW or raw +R/+R DL,
or DVD-RW of DVD-Video format.
BD-R/DVD-RAM/DVD-RW or raw +R/+R DL,
or DVD-RW of DVD-Video format.
This disc is not for-
matted properly.
Cannot be played.
matted properly.
Cannot be played.
The character indication flows
sideways.
sideways.
No PLAY
When there is a viewing restric-
tion on a BD-Video or DVD-
Video.
tion on a BD-Video or DVD-
Video.
Rating password is set.
No display
Item
FL display
Key operation
Mode name
Description
Front Key
Rating password
The audiovisual level setting password is ini-
tialized to
tialized to
Level 8
.
Open the tray, and press [SKIP REV
(Remote Controller)] and [PLAY]
simultaneously for 5 seconds.
(Remote Controller)] and [PLAY]
simultaneously for 5 seconds.
Service Mode
Setting every kind of modes for servicing.
*Details are described in
*Details are described in
7.1.3. Service Mode
at a glance
.
When the power is off, press
[PAUSE], [PLAY] and [SETUP
(Remote Controller)] keys simulta-
neously for 5 seconds.
[PAUSE], [PLAY] and [SETUP
(Remote Controller)] keys simulta-
neously for 5 seconds.
BD-ROM history cleaning < Persistent Storage> of BD-ROM standard is
cleaned.
Screen display: [The history has been
cleared] is displayed for five seconds.
Screen display: [The history has been
cleared] is displayed for five seconds.
Same display as before execution.
When the power is on, disc is not in
tray, press [STOP] and [POWER
(Remote Controller)] keys simulta-
neously for 5 seconds.
tray, press [STOP] and [POWER
(Remote Controller)] keys simulta-
neously for 5 seconds.
Forced disc eject
Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted.
The tray will open and unit will shift to P-off
mode.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted.
The display before execution
leaves.
leaves.
When the power is off, press
[PAUSE] and [OPEN/CLOSE] keys
simultaneously for 5 seconds.
[PAUSE] and [OPEN/CLOSE] keys
simultaneously for 5 seconds.
NTSC/PAL system select To switch PAL/NTSC alternately.
The
display
before
execution
leaves.
When the power is on (SS mode),
press [STOP] and [OPEN/CLOSE]
simultaneously for 5 seconds.
press [STOP] and [OPEN/CLOSE]
simultaneously for 5 seconds.
Forced power-off
When the power button is not effective while
power is ON, turn off the power forcibly.
power is ON, turn off the power forcibly.
Display in P-off mode.
Press [POWER] key over than 4
seconds.
seconds.
Error Code
Diagnosis contents
Description
Monitor Display
Automatic FL display
Click on the first or last page to see other DMP-BD60EG / DMP-BD60EB / DMP-BD60EE / DMP-BD60EF / DMP-BD80EG / DMP-BD80EB service manuals if exist.