Read Panasonic DMP-B200EB / DMP-B200EE / DMP-B200EG Service Manual online
8
3.5.1.
Work table grounding
• Put a conductive material (sheet) or steel sheet on the area where the traverse unit (optical pick-up) is placed, and ground the
sheet.
3.5.2.
Human body grounding
• Use the anti-static wrist strap to discharge the static electricity from your body.
3.6.
Handling of Traverse unit (optical pick-up)
1. Do not subject the traverse unit (optical pick-up) to hard shock as it is high precision mechanism.
2. Install the traverse unit, and then remove the short pin to discharge.
2. Install the traverse unit, and then remove the short pin to discharge.
Connect the connector in a short time.
3. Take care not to apply excessive stress to the flexible cable.
4. Do not turn the variable resistor (laser power adjustment).
4. Do not turn the variable resistor (laser power adjustment).
It has already been adjusted.
Click on the first or last page to see other DMP-B200EB / DMP-B200EE / DMP-B200EG service manuals if exist.