Read Panasonic H-X025PP / H-X025E / H-X025GK Service Manual online
9
4 Disassembly/Assembly procedures
4.1.
Disassembly/Assembly procedures
Proceed disassemble and assemble, by referring the following table and Fig.D1
IMPORTANT:
IMPORTANT:
1. It is recommended dealing with Clean box, to keep maintaining the dustproof environment.
(Refer to "3.2. Clean Box" section of this service manual for details.)
2. To minimize the possibilities/risk of getting the dust/dirt on the lens surface, keep covering the lens unit with Lens caps (front
& rear), other than necessary cases.
3. Do not touch the surface of the lens glasses with your fingers.
4. Blow off the dust on the surface of the lens with a blower brush.
5. Use lens cleaning KIT (BK)(VFK1900BK).
4. Blow off the dust on the surface of the lens with a blower brush.
5. Use lens cleaning KIT (BK)(VFK1900BK).
NOTE:
1. When tightening screws, use a Torque driver (RFKZ0456) with specified torque mentioned in each step.
2. Use VFK1390 (small driver) when screwing/unscrewing the B208.
2. Use VFK1390 (small driver) when screwing/unscrewing the B208.
CAUTION:
Keep covering the lens unit with Lens caps (front & rear), other than necessary cases.
Keep covering the lens unit with Lens caps (front & rear), other than necessary cases.
CONCERNED PART
SCREW
REMARKS
Part Name
Ref No.
Ref. No.
Color
Length
Screwing order
Torque spec.
SHADING FRAME
203
B201
Black
2.5mm
-
9.8±1N•cm
B202
Black
2.5mm
-
9.8±1N•cm
B203
Black
2.5mm
-
9.8±1N•cm
L MOUNT UNIT
206
B204
Silver
6.0mm
-
19.6±1N•cm
B205
Silver
6.0mm
-
19.6±1N•cm
B206
Silver
6.0mm
-
19.6±1N•cm
B207
Silver
3.5mm
-
19.6±1N•cm
B208
Silver
6.0mm
-
------------
Use VFK1390 (Small Driver)
REAR TUBE UNIT
207
B209
Silver
4.0mm
-
14.7±1N•cm
EARTH LINE
-
B210
Silver
2.5mm
-
14.7±1N•cm
Click on the first or last page to see other H-X025PP / H-X025E / H-X025GK service manuals if exist.