Read Panasonic H-X015PP / H-X015E / H-X015GK Service Manual online
15
4.3.
Assembly procedure
Important:
When tightening the screw, use a torque driver (RFKZ0456)
by ordering the screwing order with specified torque
described in each step.
by ordering the screwing order with specified torque
described in each step.
4.3.1.
Installation of the DUST PROOF
RING and the FILTER RING
RING and the FILTER RING
1. Insert 2 pins to 2 holes of the FILTER RING.
Then, Tighten 3 screws (A) in numerical order by using
the torque driver with specified torque.
(Torque Driver : RFKZ0456)
(Torque : 10 ± 1 N ・ cm)
the torque driver with specified torque.
(Torque Driver : RFKZ0456)
(Torque : 10 ± 1 N ・ cm)
2. Install the DUST PROOF RING.
4.3.2.
Installation of the DECO. RING
1. Please insert 2 pins of the DECO. RING to 2 holes of the
FILTER RING.
• Use new one, do not use the one which is removed.
• Double-stick tape sticks to the DECO. RING of the repair
• Double-stick tape sticks to the DECO. RING of the repair
part.
Please remove the old double-stick tape from the FIL-
TER RING.
Please remove the old double-stick tape from the FIL-
TER RING.
2. After installing the DECO. RING, use a soft cloth to press
it into place.
Click on the first or last page to see other H-X015PP / H-X015E / H-X015GK service manuals if exist.