Read Panasonic H-VS014140PP / H-VS014140E / H-VS014140GK / H-VS014140T2 Service Manual online
3
1 INTRODUCTION
1.1.
INTRODUCTION
This service manual contains technical information, which allow service personnel to understand and service this model.
Please place orders using the parts list and not the drawing reference numbers.
If the circuit is changed or modified, the information will be followed by Supplement Service Manual.
Please place orders using the parts list and not the drawing reference numbers.
If the circuit is changed or modified, the information will be followed by Supplement Service Manual.
1.2.
IMPORTANT NOTICE
1.2.1.
About Lens MAIN Block unit (Ref. 215)
1. This Service Manual does not contain the repair service information for “LENS MAIN BLOCK UNIT”(Ref.215),
because it requires special facilities and equipment.
2. “LENS MAIN BLOCK UNIT” performance must be confirmed.
3. In case of the “LENS MAIN BLOCK UNIT” defect, contact to the service department of sales company.
3. In case of the “LENS MAIN BLOCK UNIT” defect, contact to the service department of sales company.
1.2.2.
About Lens Cleaning (Inside of the Lens Unit)
1. When there is a dust/dirt inside surface of the 1st lens frame unit and/or subject side of the 2nd lens frame unit,
it can be cleaned up by removing the “Hood Adaptor” (Ref.202) and 1st lens frame unit.
Refer to the “11.Maintenance” Section of this service Manual, for details.
Refer to the “11.Maintenance” Section of this service Manual, for details.
IMPORTANT:
IT MUST BE PERFORMED INSIDE OF SATISFIED CLEAN LEVEL
(Satisfied clean level: Less than class 10,000 Federal Standard 209D).
As for clean box, refer to the “3.2. Clean box” in details.
(Satisfied clean level: Less than class 10,000 Federal Standard 209D).
As for clean box, refer to the “3.2. Clean box” in details.
1.2.3.
About Flexible Cable and Connector
Do not touch carelessly so that the foreign body should not adhere to the terminal part of flexible cable and connector.
Wipe off with a clean cloth and the cotton bud, etc. when the terminal part is dirty.
Wipe off with a clean cloth and the cotton bud, etc. when the terminal part is dirty.
Click on the first or last page to see other H-VS014140PP / H-VS014140E / H-VS014140GK / H-VS014140T2 service manuals if exist.