Read Panasonic H-FS014042PP / H-FS014042E / H-FS014042GK Service Manual online
9
4 Disassembly / Assembly procedures
4.1.
Disassembly / Assembly procedures
It is recommended dealing with Clean box, to keep maintaining the dustproof environment.
(Refer to “3.2. Clean Box” section of this service manual for details.)
IMPORTANT:
(Refer to “3.2. Clean Box” section of this service manual for details.)
IMPORTANT:
1. When servicing the surrounding part with red line (refer to Fig.D1), it must be performed inside ofsatisfied clean level.
(Satisfied clean level: Less than class 10,000 Federal Standard 209D).
As for procedure, refer to the “5 Maintenance” for details.
As for procedure, refer to the “5 Maintenance” for details.
2. To minimize the possibilities / risk of getting the dust / dirt on the lens surface,
keep covering the lens unit with Lens caps (front & rear), other than necessary cases.
3. Do not touch the surface of the lens glasses with your fingers.
4. Blow off the dust on the surface of the lens with a blower brush.
5. Use lens cleaning KIT (BK)(VFK1900BK).
4. Blow off the dust on the surface of the lens with a blower brush.
5. Use lens cleaning KIT (BK)(VFK1900BK).
Proceed disassemble / and assemble, by referring the following table and Fig.D1
NOTE:
1. When tightening the screw, use a Torque driver (RFKZ0456) by ordering
the screwing order with specified torque mentioned in each step.
2. Use VFK1390 (small driver) when removing/tighten the B213.
Fig. D1
Click on the first or last page to see other H-FS014042PP / H-FS014042E / H-FS014042GK service manuals if exist.