Read Panasonic H-ES045PP / H-ES045E / H-ES045GK Service Manual online
9
4 Disassembly/Assembly procedures
4.1.
Disassembly/Assembly procedures
It is recommended dealing with Clean box, to keep maintaining the dustproof environment.
(Refer to “3.2. Clean Box” section of this service manual for details.)
IMPORTANT:
(Refer to “3.2. Clean Box” section of this service manual for details.)
IMPORTANT:
1. To minimize the possibilities/risk of getting the dust/dirt on the lens surface,
keep covering the lens unit with Lens caps (front & rear), other than necessary cases.
2. Do not touch the surface of the lens glasses with your fingers.
3. Blow off the dust on the surface of the lens with a blower brush.
4. Use lens cleaning KIT (BK)(VFK1900BK).
3. Blow off the dust on the surface of the lens with a blower brush.
4. Use lens cleaning KIT (BK)(VFK1900BK).
Proceed disassemble/ and assemble, by referring the following table and Fig.D1
NOTE:
1. When tightening the screw, use a Torque driver (RFKZ0456) by ordering
the screwing order with specified torque mentioned in each step.
2. It is unnecessary to remove Ref.B28 for disassembly and assembly.
3. Use VFK1390 (small driver) when removing / tighten the B28, and B29.
3. Use VFK1390 (small driver) when removing / tighten the B28, and B29.
Click on the first or last page to see other H-ES045PP / H-ES045E / H-ES045GK service manuals if exist.