Read Panasonic DMC-TZ10EB / DMC-TZ10EE / DMC-TZ10EF / DMC-TZ10EP / DMC-TZ10GC / DMC-TZ10GN / DMC-TZ10SG / DMC-ZS7P / DMC-ZS7PC / DMC-ZS7PU / DMC-ZS7GD / DMC-ZS7GH / DMC-ZS7GK / DMC-ZS7GT Service Manual online
S-1
S1. About Indication of The Schematic Diagram ............................ S-1
S1.1. Important Safety Notice......................................................... S-1
S2. Voltage Chart ........................................................................... S-2
S2.1. Gyro P.C.B. ........................................................................... S-2
S2.2. Top Operation P.C.B. ............................................................. S-2
S2.3. Flash P.C.B. .......................................................................... S-2
S3. Block Diagram .......................................................................... S-3
S3.1. Overall Block Diagram .......................................................... S-3
S4. Schematic Diagram .................................................................. S-4
S4.1. Interconnection Diagram ....................................................... S-4
S4.2. SD Card (SD) Schematic Diagram........................................ S-5
S4.3. Gyro Schematic Diagram ...................................................... S-5
S4.4. Top Operation Schematic Diagram ....................................... S-6
S4.5. Flash Schematic Diagram ..................................................... S-7
S4.6. CCD Flex Schematic Diagram .............................................. S-8
S4.7. Lens Flex Schematic Diagram .............................................. S-9
S5. Print Circuit Board .................................................................. S-10
S5.1. SD P.C.B. ............................................................................ S-10
S5.2. Gyro P.C.B. ......................................................................... S-10
S5.3. Top Operation P.C.B. ........................................................... S-11
S5.4. Flash P.C.B. ........................................................................ S-12
S5.5. CCD Flex P.C.B. .................................................................. S-13
S5.6. Lens Flex P.C.B. .................................................................. S-14
S6. Replacement Parts List .......................................................... S-15
S7. Exploded View ....................................................................... S-19
S7.1. Frame and Casing Section.................................................. S-19
S7.2. Packing Parts and Accessories Section .............................. S-20
Table of contents
Service Manual
DSC1002018CE
Diagrams and Replacement
Parts List
Vol. 1
(S)...........Silver Type (except DMC-TZ10EF, ZS7GD)
Colour
(K)...........Black Type
(A)...........Blue Type (only DMC-TZ10EB/EE/EG/EP/GN, ZS7P/PC/PU)
(R)...........Red Type (except DMC-ZS7GT/GD/PC)
(T)...........Brown Type (only DMC-TZ10EE/EF/EG/EP/GC, ZS7GH/GT/GK)
(N)...........Gold Type (only DMC-TZ10GC/SG, ZS7GH/GK)
Model No.
Digital Camera
DMC-TZ10EB
DMC-TZ10EE
DMC-TZ10EF
DMC-TZ10EG
DMC-TZ10EP
DMC-TZ10GC
DMC-TZ10GN
DMC-TZ10SG
DMC-ZS7P
DMC-ZS7PC
DMC-ZS7PU
DMC-ZS7GD
DMC-ZS7GH
DMC-ZS7GK
DMC-ZS7GT
Name of Signal
OFTR
FEP
This signal is connected
to the FEP schematic diagram.
Circuit name being connected.
6.Use the parts number indicated on the Replacement Parts List .
7.Indication on Schematic diagrams:
7.Indication on Schematic diagrams:
5.The voltage being indicated here may be include observational-error (deviation) due to
internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.
4.Although the voltage and waveform available on here is measured with standard frame,
it may be differ from actual measurement due to modification of circuit and so on.
3.The voltage being indicated on the schematic diagram is measured in
"Standard-Playback" mode when there is no specify mode is mentioned.
2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.
when the TP (Test Point) indicated as " " mark.
1.Although reference number of the parts is indicated on the P.C.B. drawing and/or
schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.
FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.
COMPONENTS IDENTIFIED WITH THE MARK
HAVE THE SPECIAL CHARACTERISTICS
S1. About Indication of The Schematic Diagram
S1.1. Important Safety Notice
Click on the first or last page to see other DMC-TZ10EB / DMC-TZ10EE / DMC-TZ10EF / DMC-TZ10EP / DMC-TZ10GC / DMC-TZ10GN / DMC-TZ10SG / DMC-ZS7P / DMC-ZS7PC / DMC-ZS7PU / DMC-ZS7GD / DMC-ZS7GH / DMC-ZS7GK / DMC-ZS7GT service manuals if exist.