Read Panasonic DMC-LS1PP / DMC-LS1PL / DMC-LS1EB / DMC-LS1EG / DMC-LS1EGM / DMC-LS1GC / DMC-LS1GK / DMC-LS1GN / DMC-LS1GT / DMC-LS1SG Service Manual online
6 SERVICE NOTES
6.1. WHEN REPLACING THE MAIN C.B.A.
After replacing the MAIN C.B.A., be sure to achieve adjustment.
The adjustment instruction is available at “software download” on the “CS-Web from AVC” web-site in “TSN system”, together with
Maintenance software.
Maintenance software.
6.2. SERVICE POSITION
This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
Table S1 Extension Cable List
No.
Parts No.
Connection
Form
1
VFK1582A2125
FP9002 (MAIN) - CCD UNIT
21PIN 0.5 FFC
2
VFK1951
FP9001 (MAIN) - LENS UNIT
39PIN 0.3 FFC
3
VFK1870
PP9001 (MAIN) - PS8001 (FLASH TOP)
30PIN B to B
4
VFK1950
FP9003 (MAIN) - LCD UNIT
33PIN 0.3 FFC
5
VFK1576DC202
P9001 (MAIN) - LCD BACKLIGHT
2PIN CABLE
NOTE:
·
When the Main C.B.A. is energized, be sure to connect the LCD backlight connector (P9001) to the Main C.B.A..
If the Main C.B.A. is energized that the LCD backlight connector (P9001) is opened, it may be caused to the case not only
the power does not turn on but also transisitor (Q1070) is broken.
the power does not turn on but also transisitor (Q1070) is broken.
CAUTION
1. Be sure to discharge the capacitor for flash, which is connected with FLASH TOP C.B.A.
(Refer to “HOW TO DISCHARGE THE CHARGING CAPACITOR ON FLASH TOP C.B.A.”.)
12
DMC-LS1PP / DMC-LS1PL / DMC-LS1EB / DMC-LS1EG / DMC-LS1EGM / DMC-LS1GC / DMC-LS1GK / DMC-LS1GN / DMC-LS1GT / DMC-LS1SG
Click on the first or last page to see other DMC-LS1PP / DMC-LS1PL / DMC-LS1EB / DMC-LS1EG / DMC-LS1EGM / DMC-LS1GC / DMC-LS1GK / DMC-LS1GN / DMC-LS1GT / DMC-LS1SG service manuals if exist.