Read Panasonic DMC-LC43PP / DMC-LC43PM / DMC-LC43E / DMC-LC43B / DMC-LC43A / DMC-LC43EN / DMC-LC43KR (serv.man2) Service Manual online
1 INTRODUCTION
1.1. INTRODUCTION
This service manual contains technical information, which allow service personnel’s to understand and service this model.
Please place orders using the parts list and not the drawing reference numbers.
If the circuit is changed or modified, the information will be followed by service manual to be controlled with original service manual.
1.2. ABOUT LEAD FREE SOLDER (PbF)
Distinction of PbF PCB:
PCBs (manufactured) using lead free solder will have a PbF stamp on the PCB.
Caution:
·
Pb free solder has a higher melting point than standard solder, Typically the melting point is 50-70°F (30-40°C) higher.
Please use a high temperature soldering iron. In case of soldering iron with temperature control, please set it to 700±20°F
(370±10°C)
(370±10°C)
·
Pb free solder will tend to splash when heated too high (about 1100°F/600°C).
When soldering or unsoldering, please completely remove all of the solder on the pins or solder area, and be sure to heat the
soldering points with the Pb free solder until it melts enough.
soldering points with the Pb free solder until it melts enough.
1.3. IMPORTANT NOTICE
[1].SERVICE CAUTION
Since being supplied MAIN C.B.A. as replacement does not contains following parts, be sure to apply the following parts before
using the replacement MAIN C.B.A.
using the replacement MAIN C.B.A.
No.
PART NUMBER
DESCRIPTION
QTY
REMARKS
1
N4ECD14Z0003
BACK-UP BATTERY
1
2
VMF0558
SHEET
1
3
VEE0Y46
EARTH CONNECTOR U
1
4
VGF0968
SD PROTECT SHEET
1
5
VGF0971-KIT
ASIC SHEET
1
Being putted *1
*1:
The coated version of IC6005 shall be used after several lot of Mass-production.
If coated version of IC6005 is used, no need for covering with the “ASIC SHEET”.
3
DMC-LC43PP / DMC-LC43PM / DMC-LC43E / DMC-LC43B / DMC-LC43A / DMC-LC43EN / DMC-LC43KR
Click on the first or last page to see other DMC-LC43PP / DMC-LC43PM / DMC-LC43E / DMC-LC43B / DMC-LC43A / DMC-LC43EN / DMC-LC43KR (serv.man2) service manuals if exist.