Read Panasonic DMC-GF2CPP / DMC-GF2CEB / DMC-GF2CEC / DMC-GF2CEE / DMC-GF2CEG / DMC-GF2CGC / DMC-GF2CGD / DMC-GF2CGH / DMC-GF2CGK / DMC-GF2CGN / DMC-GF2CGT / DMC-GF2WEB / DMC-GF2WEG / DMC-GF2WGC / DMC-GF2WGD / DMC-GF2WGH / DMC-GF2WGK / DMC-GF2WGN / DMC-GF2WGT Service Manual online
DMC-GF2CEB
DMC-GF2CEC
DMC-GF2CEE
DMC-GF2CEG
DMC-GF2CGC
DMC-GF2CGD
DMC-GF2CGH
DMC-GF2CGK
DMC-GF2CGN
DMC-GF2CGT
DMC-GF2WEB
DMC-GF2WEG
DMC-GF2WGC
DMC-GF2WGD
DMC-GF2WGH
DMC-GF2WGK
DMC-GF2WGN
DMC-GF2WGT
DMC-GF2KEB
DMC-GF2KEC
DMC-GF2KEE
DMC-GF2KGC
DMC-GF2KGD
DMC-GF2KGH
DMC-GF2KGK
DMC-GF2KGN
DMC-GF2PP
DMC-GF2GC
DMC-GF2GH
Vol.1
[DMC-GF2C]
(K)...........Black Type
(S)...........Silver Type (except EE/GK/GN/GT)
(W)..........White Type (except EB/EE)
(R)...........Red Type (except GC/GD/GN/GT)
(P)...........Pink Type (only GC/GH/GK/GT)
[DMC-GF2K]
(K)...........Black Type
(S)...........Silver Type (only PP/EB/EC/EG/GC)
(W)..........White Type (except EB/EE/GH)
(R)...........Red Type (except GC/GD/GH/GN/GT)
(P)...........Pink Type (only GC/GK)
(K)...........Black Type
(S)...........Silver Type (only EB/EG/GC)
(W)..........White Type (except EB)
(R)...........Red Type (only EB/EG/GH)
(P)...........Pink Type (only GC)
[DMC-GF2]
(K)...........Black Type
DMC-GF2K series: Interchangeable Lens (H-FS014042) is bundled.
DMC-GF2W series: Interchangeable Lens (H-H014/H-FS014042) are bundled.
1.2. Leakage Current Cold Check ---------------------------4
1.3. Leakage Current Hot Check (See Figure 1.) --------4
1.4. How to Discharge the E. Capacitor on Flash
2.4. How to Replace the Lithium Battery -------------------8
3.2. Important Notice --------------------------------------------9
3.3. General Description About Lead Free Solder
5 Location of Controls and Components------------------ 18
8.2. Clean Box-------------------------------------------------- 30
8.3. Service Position ------------------------------------------ 31
9.2. Disassembly and Assemble Procedure for the
which are important for safety. These parts are marked by
tial that these critical parts should be replaced with manu-
facturer’s specified parts to prevent X-RADIATION,
shock, fire, or other hazards. Do not modify the original
design without permission of manufacturer.
from the AC power line. Use a transformer of adequate
power rating as this protects the technician from acci-
dents resulting in personal injury from electrical shocks. It
will also protect AC Adaptor from being damaged by acci-
dental shorting that may occur during servicing.
heated or damaged by the short circuit.
properly installed.
shock hazards.
lic cabinet part on the equipment such as screwheads,
connectors, control shafts, etc. When the exposed metal-
lic part has a return path to the chassis, the reading
should be between 1 M
reading must be infinity.
(See Figure 1.)
and a good earth ground, as shown in Figure 1.
lent) may be used to make the hot checks, leakage cur-
rent must not exceed 1/2 mA. In case a measurement is
outside of the limits specified, there is a possibility of a
shock hazard, and the equipment should be repaired and
rechecked before it is returned to the customer.