Read Panasonic DMC-FZ7PP / DMC-FZ7PL / DMC-FZ7EB / DMC-FZ7EE / DMC-FZ7EF / DMC-FZ7EG / DMC-FZ7EGM / DMC-FZ7GC / DMC-FZ7GD / DMC-FZ7GK / DMC-FZ7GN / DMC-FZ7GT / DMC-FZ7SG Service Manual online
4
1.4.
How to Discharge the Capacitor on Main PCB
• This unit equipped with two pieces of capacitors as flash charging capacitors.
“Either one of the capacitor discharging operation” makes discharging for others as well.
CAUTION:
1. Be sure to discharge the capacitor on MAIN PCB.
2. Be careful of the high voltage circuit on MAIN PCB when servicing.
2. Be careful of the high voltage circuit on MAIN PCB when servicing.
[Discharging Procedure]
1. Refer to the disassemble procedure and Remove the necessary parts/unit.
2. Put the insulation tube onto the lead part of Resistor (ERG5SJ102:1k
2. Put the insulation tube onto the lead part of Resistor (ERG5SJ102:1k
Ω /5W).
(an equivalent type of resistor may be used.)
3. Put the resistor between both terminals of capacitor on MAIN PCB for approx. 5 seconds.
4. After discharging confirm that the capacitor voltage is lower than 10V using a voltmeter.
4. After discharging confirm that the capacitor voltage is lower than 10V using a voltmeter.
Fig. F1
Click on the first or last page to see other DMC-FZ7PP / DMC-FZ7PL / DMC-FZ7EB / DMC-FZ7EE / DMC-FZ7EF / DMC-FZ7EG / DMC-FZ7EGM / DMC-FZ7GC / DMC-FZ7GD / DMC-FZ7GK / DMC-FZ7GN / DMC-FZ7GT / DMC-FZ7SG service manuals if exist.