Read Panasonic DMC-FZ10PP / DMC-FZ10PL / DMC-FZ10EB / DMC-FZ10EG / DMC-FZ10GC / DMC-FZ10GD / DMC-FZ10GN / DMC-FZ10SG (serv.man2) Service Manual online
7.3. HOW TO DISCHARGE THE CAPACITOR ON MAIN C.B.A.
CAUTION:
1. Be sure to discharge the capacitor on MAIN C.B.A.
2. Be careful of the high voltage circuit on MAIN C.B.A. when servicing.
[Discharging Procedure]
1. Refer to the disassemble procedure and remove the necessary parts/unit.
2. Put the insulation tube onto the lead part of resistor (ERG5SJ102:1k
Ω
/5W).
(an equivalent type of resistor may be used.)
3. Put the resistor between both terminals of capacitor on MIAN C.B.A. for approx. 5 seconds.
4. After discharging confirm that the capacitor voltage is lower than 10V using a voltmeter.
Fig. F1
7.4. CLEANING LENS, VIEWFINDER AND LCD PANEL
Do not touch the surface of lens, viewfinder and LCD Panel with your hand.
When cleaning the lens, use air-Blower to blow off the dust.
When cleaning the viewfinder and LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the their
surface.
surface.
Note:
A lens cleaning paper and lens cleaner are available at local camera shops and market place.
12
DMC-FZ10PP / DMC-FZ10PL / DMC-FZ10EB / DMC-FZ10EG / DMC-FZ10GC / DMC-FZ10GD / DMC-FZ10GN / DMC-FZ10SG
Click on the first or last page to see other DMC-FZ10PP / DMC-FZ10PL / DMC-FZ10EB / DMC-FZ10EG / DMC-FZ10GC / DMC-FZ10GD / DMC-FZ10GN / DMC-FZ10SG (serv.man2) service manuals if exist.