Read Panasonic DMC-FX3PP / DMC-FX3PL / DMC-FX3EB / DMC-FX3EE / DMC-FX3EF / DMC-FX3EG / DMC-FX3EGM / DMC-FX3GC / DMC-FX3GD / DMC-FX3GK / DMC-FX3GN / DMC-FX3GT Service Manual online
24
8.3.9.
Removal of the Battery Case
(Fig. D10)
NOTE: (When Assembling)
Be sure to confirm the following points when assembling.
• The Screw is tightened enough.
• Assembling conditions are fine. (No distortion, no illegal-
• Assembling conditions are fine. (No distortion, no illegal-
space.)
• No dust and/or dirt on every Lens surfaces.
• LCD image is fine. (No dust and dirt on it, and no gradient
• LCD image is fine. (No dust and dirt on it, and no gradient
images.)
8.4.
Disassembly Procedure for the
Lens
Lens
NOTE: When Disassembling and Assembling for the Lens
1. To minimize the possibility of the CCD being dirt, perform
disassemble and/or assemble under the condition of the
CCD is being mounted.
Disassembling procedures for the CCD unit, refer to item
8.6.
CCD is being mounted.
Disassembling procedures for the CCD unit, refer to item
8.6.
2. Take care that the dust and dirt are not entered into the
lens.
In case of the dust is putted on the lens, blow off them by
airbrush.
In case of the dust is putted on the lens, blow off them by
airbrush.
3. Do not touch the surface of lens.
4. Use lens cleaning KIT (BK)(VFK1900BK).
5. Apply the grease (VFK1829) to the point where is shown
4. Use lens cleaning KIT (BK)(VFK1900BK).
5. Apply the grease (VFK1829) to the point where is shown
to" Grease apply" in the figure.
When the grease is applied, use a toothpick and apply
thinly.
When the grease is applied, use a toothpick and apply
thinly.
Click on the first or last page to see other DMC-FX3PP / DMC-FX3PL / DMC-FX3EB / DMC-FX3EE / DMC-FX3EF / DMC-FX3EG / DMC-FX3EGM / DMC-FX3GC / DMC-FX3GD / DMC-FX3GK / DMC-FX3GN / DMC-FX3GT service manuals if exist.