Read Panasonic DMC-FX150P / DMC-FX150PC / DMC-FX150PL / DMC-FX150E / DMC-FX150EB / DMC-FX150EE / DMC-FX150EF / DMC-FX150EG / DMC-FX150SG / DMC-FX180GC / DMC-FX180GD / DMC-FX180GK / DMC-FX180GN / DMC-FX180GT / DMC-FX180GJ / DMC-FX150EES / DMC-FX150EEK / DMC-FX150EEN Service Manual online
10
3.4.2.
INITIAL SETTINGS:
When you replace the MAIN PCB, be sure to perform the initial settings after achieving the adjustment by ordering the following pro-
cedure in accordance with model suffix of the unit.
1. IMPORTANT NOTICE:
cedure in accordance with model suffix of the unit.
1. IMPORTANT NOTICE:
Before proceeding Initial settings, be sure to read the following CAUTIONS.
2. PROCEDURES:
• Precautions: Proceed the picture back up from the unit. (Refer to above "CAUTION 2")
• Preparation. Set the Mode dial to "P" (Program AE mode).
• Step 1. The temporary cancellation of initial setting:
• Preparation. Set the Mode dial to "P" (Program AE mode).
• Step 1. The temporary cancellation of initial setting:
Set the [REC]/[PLAYBACK] selector switch to “[ REC ] (Red camera mark)”.
While keep pressing [ E.ZOOM ] and “[ UP ] of Cursor buttons” simultaneously, turn the Power on.
While keep pressing [ E.ZOOM ] and “[ UP ] of Cursor buttons” simultaneously, turn the Power on.
• Step 2. The cancellation of initial setting:
Set the [REC]/[PLAYBACK] selector switch to “[ PLAYBACK ]”.
Press [ E.ZOOM ] and “[ UP ] of Cursor buttons” simultaneously, then turn the Power off.
Press [ E.ZOOM ] and “[ UP ] of Cursor buttons” simultaneously, then turn the Power off.
• Step 3. Turn the Power on:
Set the [REC]/[PLAYBACK] selector switch to “[ REC ] (Red camera mark)”, and then turn the Power on.
• Step 4. Display the INITIAL SETTING:
While keep pressing [ MENU/SET ] and “[ RIGHT ] of Cursor buttons” simultaneously, turn the Power off.
When MAIN P.C.B. is replaced, all of the model suffix is displayed as follows.
There are two kinds of “INITIAL SETTINGS” menu format.
[1. After replacing MAIN P.C.B.]
When MAIN P.C.B. is replaced, all of the model suffix is displayed as follows.
There are two kinds of “INITIAL SETTINGS” menu format.
[1. After replacing MAIN P.C.B.]
Click on the first or last page to see other DMC-FX150P / DMC-FX150PC / DMC-FX150PL / DMC-FX150E / DMC-FX150EB / DMC-FX150EE / DMC-FX150EF / DMC-FX150EG / DMC-FX150SG / DMC-FX180GC / DMC-FX180GD / DMC-FX180GK / DMC-FX180GN / DMC-FX180GT / DMC-FX180GJ / DMC-FX150EES / DMC-FX150EEK / DMC-FX150EEN service manuals if exist.