Read Panasonic DMC-FX10P / DMC-FX10PC / DMC-FX10PL / DMC-FX10EB / DMC-FX10EE / DMC-FX10EF / DMC-FX10EG / DMC-FX10EGM / DMC-FX10GC / DMC-FX10GD / DMC-FX10GK / DMC-FX10GN / DMC-FX10GT / DMC-FX10SG / DMC-FX12P / DMC-FX12PC / DMC-FX12PL / DMC-FX12EB / DMC-FX12EE / DMC-FX12E Service Manual online
11
3.4.2.
INITIAL SETTINGS:
When you replace the Main PCB, be sure to perform the initial settings after achieving the adjustment by ordering the following pro-
cedure in accordance with model suffix of the unit.
1. IMPORTANT NOTICE:
cedure in accordance with model suffix of the unit.
1. IMPORTANT NOTICE:
Before proceeding Initial settings, be sure to read the following CAUTIONS.
2. PROCEDURES:
• Preparation. Proceed the picture back up from the unit (Refer to above "CAUTION 2")
• Step 1. The temporary cancellation of initial setting:
• Step 1. The temporary cancellation of initial setting:
Set the mode dial to “[ Normal picture mode ] (Red camera mark)”.
While keep pressing [ Optical Image Stabilizer ] and “[ UP ] of Cross key” simultaneously, turn the Power on.
While keep pressing [ Optical Image Stabilizer ] and “[ UP ] of Cross key” simultaneously, turn the Power on.
• Step 2. The cancellation of initial setting:
Set the mode dial to “[ Playback ]”.
Press [ Optical Image Stabilizer ] and “[ UP ] of Cross key” simultaneously, then turn the Power off.
Press [ Optical Image Stabilizer ] and “[ UP ] of Cross key” simultaneously, then turn the Power off.
• Step 3. Turn the Power on:
Set the mode dial to “[ Normal picture mode ] (Red camera mark)”, and then turn the Power on.
• Step 4. Display the INITIAL SETTING:
While keep pressing [ MENU ] and “[ RIGHT ] of Cross key” simultaneously, turn the Power off.
Click on the first or last page to see other DMC-FX10P / DMC-FX10PC / DMC-FX10PL / DMC-FX10EB / DMC-FX10EE / DMC-FX10EF / DMC-FX10EG / DMC-FX10EGM / DMC-FX10GC / DMC-FX10GD / DMC-FX10GK / DMC-FX10GN / DMC-FX10GT / DMC-FX10SG / DMC-FX12P / DMC-FX12PC / DMC-FX12PL / DMC-FX12EB / DMC-FX12EE / DMC-FX12E service manuals if exist.