Read Panasonic DMC-FT3EB / DMC-FT3EE / DMC-FT3EF / DMC-FT3EG / DMC-FT3EP / DMC-FT3GC / DMC-FT3GN / DMC-FT3SG / DMC-TS3P / DMC-TS3PC / DMC-TS3PU / DMC-TS3GH / DMC-TS3GD / DMC-TS3GT Service Manual online
51
10.3. Details of Electrical Adjustment
10.3.1.
How to execute the Electrical Adjustment
It is not necessary to connect the camera to a PC to perform adjustments.
"Flag reset operation" and "Initial setting operation" are required when carrying out the alignment, follow the procedure below.
"Flag reset operation" and "Initial setting operation" are required when carrying out the alignment, follow the procedure below.
10.3.1.1. Startup Electrical Adjustment mode
1. Release the initial settings.
2. Insert a recordable SD card.
2. Insert a recordable SD card.
(Without a SD card, the automatic adjustment can not
executed.)
executed.)
3. Procedure to set the camera into adjustment mode:
a. Set the mode dial to Normal picture mode.
b. Turn the Power SW off.
b. Turn the Power SW off.
c. Turn the Power SW on pressing MOTION PICTURE
and Menu simultaneously.
LCD monitor displays "SERVICE MODE".
(Refer to Fig.F3-1)
LCD monitor displays "SERVICE MODE".
(Refer to Fig.F3-1)
Fig. 3-1
10.3.1.2. Status Adjustment Flag Setting
Reset (Not yet adjusted) the status flag condition.
1. After pressing the DISPLAY button, the LCD monitor dis-
plays the Flag status screen (Refer to Fig.3-2.)
2. Select item by pressing the cross keys. (Gray cursor is
moved accordingly.)
3. Press the Delete button.
Note:
The selected item's flag has been changed from
"F (green)" to "0 (yellow)".
*(Refer to Fig. 3-3)
"F (green)" to "0 (yellow)".
*(Refer to Fig. 3-3)
*Flag conditions:
F (green)
means that the alignment has been completed and the
status flag condition is set. In this case, the flag condition
should be reset, if you try to carry out the automatic align-
ment.
0 (yellow)
means that the alignment has been not "completed"and
the status flag condition is "reset". In this case, automatic
alignment is available.
F (green)
means that the alignment has been completed and the
status flag condition is set. In this case, the flag condition
should be reset, if you try to carry out the automatic align-
ment.
0 (yellow)
means that the alignment has been not "completed"and
the status flag condition is "reset". In this case, automatic
alignment is available.
Fig. 3-2
Fig. 3-3
< Example: OIS flag is reset. >
• In case of setting the status flag into set condition again without completion of the alignment, the status flag should be SET by
using PC, or UNDO by using ROM BACKUP function.
Click on the first or last page to see other DMC-FT3EB / DMC-FT3EE / DMC-FT3EF / DMC-FT3EG / DMC-FT3EP / DMC-FT3GC / DMC-FT3GN / DMC-FT3SG / DMC-TS3P / DMC-TS3PC / DMC-TS3PU / DMC-TS3GH / DMC-TS3GD / DMC-TS3GT service manuals if exist.