DMC-FT20EE - Panasonic Digital Camera Service Manual (repair manual). Page 12

12

After replacing the Main P.C.B., be sure to perform the initial settings after achieving the adjustment by ordering the following 
procedure in accordance with model suffix of the unit. 
1. IMPORTANT NOTICE:

Before proceeding Initial settings, be sure to read the following CAUTIONS. 

• Precautions: Read the above "CAUTION 1" and "CAUTION 2", carefully
• Preparation:

1. Attach the Battery to the unit.
2. Set  to NORMAL PICTURE mode by operating the mode button.

If the picture mode is other than NORMAL PICTURE mode, it does not display the initial settings menu.

• Step 1. The temporary cancellation of "INITIAL SETTINGS":

While keep pressing "UP of Cursor button" and MOTION PICTURE button simultaneously, turn the Power on.

• Step 2. The cancellation of "INITIAL SETTINGS":

Press the PLAYBACK button.
Press "UP of Cursor button" and MOTION PICTURE button simultaneously, then turn the Power off.

• Step 3. Turn the Power on:

Turn the Power on.

• Step 4. Display the "INITIAL SETTINGS" menu:

While keep pressing MENU/SET and "RIGHT of Cursor button" simultaneously, turn the Power off.
The "INITIAL SETTINGS" menu is displayed.
There are two kinds of "NITIAL SETTINGS" menu form as follows:
[CASE 1. After replacing Main P.C.B.]
When Main P.C.B. has just been replaced, the following model suffix list is displayed as follows. (Six pages in total)