Read Panasonic DMC-FS6P / DMC-FS6PC / DMC-FS6PR / DMC-FS6PU / DMC-FS6EB / DMC-FS6EE / DMC-FS6EF / DMC-FS6EG / DMC-FS6EP / DMC-FS6GC / DMC-FS6GJ / DMC-FS6GK / DMC-FS6GN / DMC-FS6GT Service Manual online
4
1.4.
How to Discharge the Capacitor on Flash Top PCB
CAUTION:
1.
Be sure to discharge the capacitor on FLASH TOP PCB.
2.
Be careful of the high voltage circuit on FLASH TOP PCB when servicing.
[Discharging Procedure]
1. Refer to the disassemble procedure and Remove the necessary parts/unit.
2. Put the insulation tube onto the lead part of Resistor (ERG5SJ102:1k
2. Put the insulation tube onto the lead part of Resistor (ERG5SJ102:1k
Ω /5W).
(an equivalent type of resistor may be used.)
3. Put the resistor between both terminals of capacitor on FLASH TOP PCB for approx. 5 seconds.
4. After discharging confirm that the capacitor voltage is lower than 10V using a voltmeter.
4. After discharging confirm that the capacitor voltage is lower than 10V using a voltmeter.
Fig. F1
Click on the first or last page to see other DMC-FS6P / DMC-FS6PC / DMC-FS6PR / DMC-FS6PU / DMC-FS6EB / DMC-FS6EE / DMC-FS6EF / DMC-FS6EG / DMC-FS6EP / DMC-FS6GC / DMC-FS6GJ / DMC-FS6GK / DMC-FS6GN / DMC-FS6GT service manuals if exist.