Read Panasonic DMC-FS25P / DMC-FS25PC / DMC-FS25PU / DMC-FS25EB / DMC-FS25EE / DMC-FS25EF / DMC-FS25EG / DMC-FS25EP / DMC-FS25GC / DMC-FS25GD / DMC-FS25GK / DMC-FS25GT Service Manual online
10
3.4.2.
INITIAL SETTINGS:
After replacing the MAIN PCB, be sure to perform the initial settings after achieving the adjustment by ordering the following proce-
dure in accordance with model suffix of the unit.
1. IMPORTANT NOTICE:
dure in accordance with model suffix of the unit.
1. IMPORTANT NOTICE:
Before proceeding Initial settings, be sure to read the following CAUTIONS.
2. PROCEDURES:
• Precautions: Read the above "CAUTION 1" and "CAUTION 2", carefully.
• Preparation:
• Preparation:
1. Attach the Battery or AC Adaptor with a DC coupler to the unit.
2. Set the recording mode to the [NORMAL PICTURE] mode.
2. Set the recording mode to the [NORMAL PICTURE] mode.
(Press the [MODE] button and select the [NORMAL PICTURE] by pressing the “[ UP ] and [DOWN] of Slide switch”, then
press the [MENU/SET] button.)
NOTE:
press the [MENU/SET] button.)
NOTE:
If the unit is other than [NORMAL PICTURE] mode, it does not display the initial settings menu.
•
Step 1. The temporary cancellation of “INITIAL SETTINGS”:
Set the [REC]/[PLAYBACK] selector switch to “[ REC ] (Camera mark)”.
While keep pressing “[ UP ] of Slide switch” and [ iA ] button simultaneously, turn the Power on.
Set the [REC]/[PLAYBACK] selector switch to “[ REC ] (Camera mark)”.
While keep pressing “[ UP ] of Slide switch” and [ iA ] button simultaneously, turn the Power on.
•
Step 2. The cancellation of “INITIAL SETTINGS”:
Set the [REC]/[PLAYBACK] selector switch to “[ PLAYBACK ]”.
Press “[ UP ] of Slide switch” and [ iA ] button simultaneously, then turn the Power off.
Set the [REC]/[PLAYBACK] selector switch to “[ PLAYBACK ]”.
Press “[ UP ] of Slide switch” and [ iA ] button simultaneously, then turn the Power off.
•
Step 3. Turn the Power on:
Set the [REC]/[PLAYBACK] selector switch to “[ REC ] (Camera mark)”, and then turn the Power on.
Set the [REC]/[PLAYBACK] selector switch to “[ REC ] (Camera mark)”, and then turn the Power on.
•
Step 4. Display the INITIAL SETTING:
NOTE:
NOTE:
If the unit is other than [NORMAL PICTURE] mode, it does not display the initial settings menu.
While keep pressing [ MENU/SET ] and “[ RIGHT ] of Slide switch” simultaneously, turn the Power off.
The "INITIAL SETTINGS" menu is displayed.
There are two kinds of “INITIAL SETTINGS” menu form as follows:
The "INITIAL SETTINGS" menu is displayed.
There are two kinds of “INITIAL SETTINGS” menu form as follows:
Click on the first or last page to see other DMC-FS25P / DMC-FS25PC / DMC-FS25PU / DMC-FS25EB / DMC-FS25EE / DMC-FS25EF / DMC-FS25EG / DMC-FS25EP / DMC-FS25GC / DMC-FS25GD / DMC-FS25GK / DMC-FS25GT service manuals if exist.