Read Panasonic DMC-FS22EE Service Manual online
11
3.4.2.
INITIAL SETTINGS:
After replacing the MAIN P.C.B., make sure to perform the initial settings after achieving the adjustment by ordering the following
procedure in accordance with model suffix of the unit.
1. IMPORTANT NOTICE:
procedure in accordance with model suffix of the unit.
1. IMPORTANT NOTICE:
Before proceeding Initial settings, make sure to read the following CAUTIONS.
2. PROCEDURES:
• Precautions: Read the above "CAUTION 1" and "CAUTION 2", carefully.
• Preparation:
• Preparation:
1. Attach the Battery or AC Adaptor with a DC coupler to the unit.
(Since this unit has built-in memory, it can be performed without inserting SD memory card.)
2. Select with the touch panel in order to [ REC ] mode and [ NORMAL PICTURE ] mode.
3. Turn off the power by pressing the power button which is located on the top case unit.
3. Turn off the power by pressing the power button which is located on the top case unit.
(If the unit is other than [ NORMAL PICTURE] mode, it does not display the initial setting menu.)
• Step 1. The temporary cancellation of “INITIAL SETTINGS”:
While pressing “W side of [ ZOOM LEVER ]”, [ SHUTTER BUTTON ] and touch the screen (Any position of the screen is accept-
able) simultaneously, turn the power on.
able) simultaneously, turn the power on.
• Step 2. The cancellation of “INITIAL SETTINGS”:
1. Insert the SD memory card into the camera.
2. Select with the touch panel to [ PLAYBACK ] mode.
3. Touch Setup after touching MENU.
4. Touch the display version and version display state.
5. Touch near the center of screen, while [ SHUTTER BUTTON ] is pressed halfway.
6. Turn the power off.
2. Select with the touch panel to [ PLAYBACK ] mode.
3. Touch Setup after touching MENU.
4. Touch the display version and version display state.
5. Touch near the center of screen, while [ SHUTTER BUTTON ] is pressed halfway.
6. Turn the power off.
The LCD displays the “ ! ” mark before the unit powers down.
• Step 3. Turn the Power on:
Turn the Power on.
• Step 4. Display the INITIAL SETTING:
Display “Clock Set” screen, and then move the [ ZOOM LEVER ] to “T” side, turn the power off.
The "INITIAL SETTINGS" menu is displayed.
There are two kinds of “INITIAL SETTINGS” menu form as follows:
The "INITIAL SETTINGS" menu is displayed.
There are two kinds of “INITIAL SETTINGS” menu form as follows:
Click on the first or last page to see other DMC-FS22EE service manuals if exist.