Read Panasonic DMC-FS12P / DMC-FS12PC / DMC-FS12PR / DMC-FS12PU / DMC-FS12EB / DMC-FS12EE / DMC-FS12EG / DMC-FS12EP / DMC-FS12GC / DMC-FS12GJ / DMC-FS12GK / DMC-FS12GN / DMC-FS12GT Service Manual Simplified online
DMC-FS12PC
DMC-FS12PR
DMC-FS12PU
DMC-FS12EB
DMC-FS12EE
DMC-FS12EG
DMC-FS12EP
DMC-FS12GC
DMC-FS12GJ
DMC-FS12GK
DMC-FS12GN
DMC-FS12GT
(S)-------Silver Type (except GT)
(K)-------Black Type (except GT)
(P)-------Pink Type (except EG/GN)
(A)-------Blue Type (only P/PC/PU/EP/GC/GN)
(G)-------Green Type (only P/PC/PU)
Model No.DMC-FS7P/PC/PR/PU/EB/EE/EF/EG/EP/GC/GD/GJ/GK/GN/GT Vol.1 Order No.DSC0902005CE
1.2. Important Notice 1:(Other than U.S.A. and
3 Disassembly and Assembly Instructions -----------------7
3.2. Assembly Procedure for the Lens ---------------------9
3.3. Removal of the CCD Unit ------------------------------ 11
3.4. Removal of the Focus Motor Unit -------------------- 12
3.5. The Applyment of Grease Method ------------------- 12
4.2. Flash Top Schematic Diagram ------------------------ 14
4.3. CCD Flex Schematic Diagram ------------------------ 15
4.4. CCD Flex P.C.B.------------------------------------------ 16
5.2. Frame and Casing Section ---------------------------- 18
5.4. Packing and Accessories Section (2) -------------- 22
Digital Camera; DMC-FS12 series
The Digital Camera DMC-FS12 series have been developed based on DMC-FS7 series.
Since this Service Manual does not cover the same part which is already described in the Service Manual for DMC-FS7 series,
when servicing, refer to the descriptions in the Service Manual for ;
DMC-FS7P/PC/PR/PU/EB/EE/EF/EG/EP/GC/GD/GJ/GK/GN/GT: Order No.DSC0902005CE (Service Manual Vol. 1).
The following category is/are recycle module part. please send it/them to Central Repair Center.
MAIN PCB : VEP56074F
the lens unit for DMC-FS12 is only one type.
Therefore, it is able to replace the defective part only.
(Unnecessary to distinguish the lens type. No limitation of the replacement part item described in service manual for FS7.)
Refer to the “Disassembly and Assembly Instructions” and “Exploded views” in details.
procedure in accordance with model suffix of the unit.
1. IMPORTANT NOTICE:
• Preparation:
2. Set the recording mode to the [NORMAL PICTURE] mode.
then press the [MENU/SET] button.)
NOTE:
While keep pressing “[ UP ] of Cursor button” and [ iA ] button simultaneously, turn the Power on.
Press “[ UP ] of Cursor button” and [ iA ] button simultaneously, then turn the Power off.
The “INITIAL SETTINGS” menu is displayed.
There are two kinds of “INITIAL SETTINGS” menu form as follows: