Read Panasonic WV-CU850 Service Manual online
WV-CU850
– 4 –
#4
Forward Run key (FWD RUN)
This key is used to run a selected Tour Sequence in for-
ward direction on the active monitor.
It also restarts a Tour Sequence forward from the step
that was previously paused by pressing the PAUSE key.
This key is used to run a selected Tour Sequence in for-
ward direction on the active monitor.
It also restarts a Tour Sequence forward from the step
that was previously paused by pressing the PAUSE key.
#5
Reverse Run key (REV RUN)
This key is used to run a selected Tour Sequence in
reverse direction on the active monitor.
It also restarts a Tour Sequence backward from the step
that was previously paused by pressing the PAUSE key.
This key is used to run a selected Tour Sequence in
reverse direction on the active monitor.
It also restarts a Tour Sequence backward from the step
that was previously paused by pressing the PAUSE key.
#6
Monitor key (MONITOR)
This key is used to select a monitor.
To select a monitor, press the corresponding Numeric
keys, followed by the MONITOR key.
This key is also used to exit from alarm selecting mode
to normal operation mode.
This key is used to select a monitor.
To select a monitor, press the corresponding Numeric
keys, followed by the MONITOR key.
This key is also used to exit from alarm selecting mode
to normal operation mode.
#7
Group Preset key (GROUP PRESET)
This key, in combination with the Numeric keys, is used
to activate a previously programmed Group Preset func-
tion.
Pressing this key while holding down the SHIFT key will
display the Operator ID on the LCD display (OPE ID).
This key, in combination with the Numeric keys, is used
to activate a previously programmed Group Preset func-
tion.
Pressing this key while holding down the SHIFT key will
display the Operator ID on the LCD display (OPE ID).
#8
Group Sequence key (GROUP SEQ)
This key, in combination with the Numeric keys, is used
to run a Group Sequence forward on the assigned moni-
tors.
This key, in combination with the Numeric keys, is used
to run a Group Sequence forward on the assigned moni-
tors.
#9
Tour Sequence key (TOUR SEQ)
This key, in combination with the Numeric and FWD
RUN (REV RUN) keys, is used to run a Tour Sequence
forward (backward) on the active monitor.
Select the desired tour number by pressing the Numeric
keys. Hold down this key and then press the FWD RUN
(REV RUN) key.
This key, in combination with the Numeric and FWD
RUN (REV RUN) keys, is used to run a Tour Sequence
forward (backward) on the active monitor.
Select the desired tour number by pressing the Numeric
keys. Hold down this key and then press the FWD RUN
(REV RUN) key.
Note: By default, pressing TOUR SEQ after numeric
input will run the selected Tour Sequence forward.
$0
OSD (On Screen Display) key (OSD)
This key is used to toggle the currently selected display
on and off on the active monitor.
Pressing one of the numeric keys shown below while
holding down the OSD key will toggle the following dis-
play items on the active monitor on and off.
This key is used to toggle the currently selected display
on and off on the active monitor.
Pressing one of the numeric keys shown below while
holding down the OSD key will toggle the following dis-
play items on the active monitor on and off.
2:
Camera Title (CAM ID)
3:
General Status (GEN)
5:
Monitor Status (MSTATUS)
6:
All Display (ALL)
Click on the first or last page to see other WV-CU850 service manuals if exist.