WV-CU360 - Panasonic Video Monitoring Service Manual (repair manual). Page 4

– 2 –

o

These buttons are used to close or open the lens iris of
cameras equipped with the specified lens.
When these buttons are pressed simultaneously, the
lens iris is reset to the factory default settings.

!0

These buttons are used to adjust the lens focus of cam-
eras equipped with the specified lens.
When these buttons are pressed simultaneously, the
lens focus is set automatically if the specified camera is
used.

!1

These buttons are used for zooming cameras equipped
with the specified lens.

!2

Selects a specific System Unit in a multiple Unit system.
To select a Unit, press this button after entered the unit
number with the Numeric button. Or to confirm a unit
number, press this button after pressing the SHIFT but-
ton. The selected unit address appears on the LED dis-
play.
The unit that is assigned to number 1 can be selected by
pressing this button.

!3

Selects a specific System Unit in a multiple Unit system.
To select a Unit, press this button after entered the unit
number with the Numeric button. The selected unit
address appears on the LED display.
The unit that is assigned to the number 1 can be select-
ed by pressing this button.

!4

This button is used to return the direction of a specific
camera to a home position.
In combination with the Numeric buttons, this button is
also used to assign a preset position to a specific cam-
era.
Pressing it while holding down the Program/Camera
Setup/Camera Function button will program preset posi-
tion.

!5

These buttons are used for numeric input, such as cam-
era, monitor, unit numbers, and preset positions.

!6

CAM: Used for camera selection. To select a camera,

enter the desired Camera number with the Numeric
buttons, and then press this button.

SET: Executes the currently highlighted setting in the

Setup menu.

Pressing this button together with the MON/ESC button
for approximately 2 seconds will log out from the system.

!7

MON: Used for monitor selection and confirmation. To

select a monitor, enter the desired Monitor number
with the Numeric keys, and then press this button.
The selected monitor number appears on the LED
display.
To confirm a monitor number, simply this button.

ESC: This button is used to escape from the currently

highlighted selection and return to the previous menu
of the Setup Menu.

Pressing this button together with the CAM/SET button
for approximately 2 seconds will log out from the system.

!8

Pressing this button for 2 seconds or more will open the
camera setup menu. Pressing it in combination with the
Numeric buttons after pressing the Shift button will exe-
cute camera functions. The LED next to the button is lit
during the camera setup operation.
This button is used to program camera patrol learning
and preset position functions.

!9

Pressing this button for 2 seconds or more will open the
Setup menu of system unit. Pressing it after pressing the
Shift button will function the system unit in combination
with the Numeric buttons. 
The LED next to the button is lit during the setup opera-
tion.

@0

Pressing this button in combination with buttons to which
special functions have been assigned will activate these
functions. 
The LED next to the button is lit when the button is
pressed.
The LED next to the button is gone off when the button is
pressed again.

@1

Pressing this button will activate the auto panning func-
tion of cameras provided with this feature. Pressing it
after pressing the Shift button will display the picture
which changed to a black and white picture on the moni-
tor.

tion camera: Simply press this button, or press

Numeric button 1 followed by this button.

AUTO SORT ON: Press Numeric button 2 followed by

this button.

AUTO SEQ ON: Press Numeric button 3 followed by this

button.

RANDOM PAN ON: Press Numeric button 4 followed by

this button.