WV-CS570, WV-CS574E - Panasonic Video Monitoring Service Manual (repair manual). Page 2

Read Panasonic WV-CS570 / WV-CS574E Service Manual online

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO  REDUCE THE RISK OF ELECTRIC SHOCK, 
DO NOT REMOVE COVER (OR BACK). NO USER 
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol warns the user that uninsulated voltage within 
the unit may have sufficient magnitude to cause electric 
shock. Therefore, it is dangerous to make any kind of contact 
with any inside part of this unit.
This symbol alerts the user that important literature concerning 
the operation and maintenance of this has been included.
Therefore,  it  should  be  read  carefully  in  order  to avoid 
any problems.
T
here are special components used in this equipment which are important for safety. These parts are indicated 
by  the ”
 
Y
 
”  mark on the schematic diagram and the replacement parts list. It is essential that these critical 
parts should be replaced with manufacturer's specified parts to prevent X-radiation, shock, fire, or other hazards.
Do not modify the original design without permission of manufacture.
IMPORTANT SAFETY NOTICE
About  Lead  Free  Solder (PbF)
Distribution of PbF PCB:
PCBs (manufactured) using lead free solder (PbF) will have a stamp on the PCB.
Caution:
8
Lead free solder has a higher melting point than standard solder. Typically the melting points is 35 
°C – 40 °C
(95 
°F – 104 °F) higher. Please use a soldering iron with temperature control and adjust it to 360 °C – 370 °C
(680 
°F – 698 °F). In case of using high temperature soldering iron, please be careful not to heat too long.
8
Lead free solder will tend to splash when heated too high (600 
°F / 1112 °F).
8
Lead free solder (Sn - 3.0Ag – 0.5Cu) or equivalents are recommended on repairing our lead free soldered PCB.
     WARNING
This service information is designed for experienced repair technicians only and is not designed for use by the 
general public.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to 
service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any 
attempt to service or repair the product or products dealt with in this service information by anyone else could 
result in serious injury or death.
Dimensions :
Weight :
Auto Focus :
Auto Mode :
Auto Pan Key :
Digital Flip :
Camera ID :
Motion Detector :
Alarm IN :
Alarm OUT :
Privacy Zone :
Proportional PAN/TILT :
Patrol :
Cleaning :
Image Hold :
Panning Range :
Panning Angle Setting :
Panning Mode :
Panning Speed :
Tilting Range :
Tilting Mode :
120 (D) x 191 (H) mm (4-3/4" (D) x 7-1/2" (H))
approx. 2 kg (4.4 lbs)
MANUAL/AUTO
OFF/SEQ/SORT/AUTO PAN/PATROL
SEQ/SORT/AUTO PAN/PATROL PLAY
ON/OFF
preset ID, camera ID, area title : up to 16 characters
ON/OFF
4 inputs (ALARM IN 1 - 4) pulled up to 5.0 V DC OFF (open or 4 V DC - 5 V DC)/
ON (0 V 0.2 mA)
2 outputs (ALARM/AUX1, AUX2) open collector - output max. 16 V DC 
100 mA OFF (OPEN)/ON (0 V)
ON/OFF, up to 8 zones
ON/OFF
LEARN/PLAY/STOP, up to 60 seconds
ON/OFF
ON/OFF
360° endless
possible (in auto-pan mode)
manual/sequential position/sort position/auto pan
manual : approx. 0.1°/s - 120°/s 8-steps/16-steps/64-steps
sequence position : maximum approx. 300°/s
0° to 180° (–5° to 185° at 5° tilt angle setting)
manual/sequential position/sort position
WV-CS570_574E/1  05.6.11 3:25 PM  ページ 2
Page of 52
Display

Click on the first or last page to see other WV-CS570 / WV-CS574E service manuals if exist.