Read Panasonic WV-CS320 / WV-CS324E Service Manual online
Note) When mounting the Lens Cover B to the Lens, insert
the projection of the Lens to the hole of the Lens
Cover B as shown in Fig. 2-1-15.
Fig. 2-1-15
w
Referring to Fig. 2-1-16, remove three screws that secure
the Sensor Board and disconnect the cable from CN300
on the Main Board, then remove the Sensor Board.
Fig. 2-1-16
}
Referring to Fig. 2-1-12, remove the Cooling Fan by
giving a light press to it from the outside of the Lens
Cover A.
Fig. 2-1-12
Note) When mounting the Cooling Fan to the Lens Cover A,
turn the cable of the Cooling Fan toward the Air Hole
of the Lens Cover A as shown in Fig. 2-1-13.
Fig. 2-1-13
q
Referring to Fig. 2-1-14, remove two screws that secure
the Lens Cover B and remove the Lens Cover B.
Fig. 2-1-14
– 2-5 –
Cooling Fan
Lens Cover A
Give a light press.
Lens Cover A
Air Hole
Cable from
Cooling Fan
Cooling Fan
Remove two screws.
Lens Cover B
Hole
Lens Cover B
Projection
Lens
CN300
Sensor
Board
Board
Remove three screws.
Click on the first or last page to see other WV-CS320 / WV-CS324E service manuals if exist.