Read Panasonic WV-CP472HE Service Manual Simplified online
– 2 –
8
Referring to Fig. 1, remove two screws that secure the
Camera Mounting Bracket and remove the Camera
Mounting Bracket from the Camera.
Camera Mounting Bracket and remove the Camera
Mounting Bracket from the Camera.
8
Referring to Fig. 2, remove two screws that secure the
Front Unit and pull out the Front Unit from the Rear Unit
slightly.
Front Unit and pull out the Front Unit from the Rear Unit
slightly.
8
Remove the Flexible Flat Cable of the Rear Unit from the
Front Unit.
(Disconnect the connector CN2 on the Main Board.)
Front Unit.
(Disconnect the connector CN2 on the Main Board.)
Fig. 1
Fig. 2
Remove two
screws.
screws.
Camera Mounting Bracket
Remove two
screws.
screws.
Rear Unit
Fig. 4
8
Reconnect the Flexible Flat Cable and the Wire Ass'y of
the Front Unit to CN1 and CN3 on the Main Board.
the Front Unit to CN1 and CN3 on the Main Board.
8
Reconnect the connectors by using the Extension Cable
(Refer to the Original Service Manual), between CN2 on
the Main Board and CN3 on the I/F Board for Adjustment.
(Refer to the Original Service Manual), between CN2 on
the Main Board and CN3 on the I/F Board for Adjustment.
8
Referring to Fig. 4, remove two screws that secure the
Front Shield Plate and remove the Front Shield Plate
from the Front Unit.
Front Shield Plate and remove the Front Shield Plate
from the Front Unit.
8
Disconnect the connectors CN1 and CN3 on the Main
Board, and remove the Flexible Flat Cable and the Wire
Ass'y of the Front Unit.
Board, and remove the Flexible Flat Cable and the Wire
Ass'y of the Front Unit.
8
Remove two screws that secure the Main Board and
remove the Main Board from the Front Shield Plate.
remove the Main Board from the Front Shield Plate.
Front Shield Plate
Remove
two
screws.
two
screws.
Front Unit
Wire Ass'y
Flexible Ftat Cable
8
Referring to Fig. 3, remove four screws that secure the
I/F Board, pull out the I/F Board, the Video Output cable
with BNC Connector (Connected to CN5) and the Power
Cable (Connected to CN1) from the Rear Unit.
I/F Board, pull out the I/F Board, the Video Output cable
with BNC Connector (Connected to CN5) and the Power
Cable (Connected to CN1) from the Rear Unit.
8
Disconnect the connector CN3 on the I/F Board and
remove the Flexible Flat Cable, and remove the I/F
Board.
remove the Flexible Flat Cable, and remove the I/F
Board.
Flexible Flat Cable
Fig. 3
Flexible Flat Cable
CN2 on the
Main Board
Main Board
Front Unit
Rear Unit
CN3
CN5
Remove four screws.
Video Output Cable with
BNC Connector
BNC Connector
I/F Board
Remove two screws.
CN2
Main Board
CN3
CN1
DISASSEMBLING PROCEDURE FOR ADJUSTMENT
Power Cable
Camera
CN1
Click on the first or last page to see other WV-CP472HE service manuals if exist.