Read Panasonic WV-CM1020 Service Manual online
–3 –
< Service Menu >
8
Turn the Power Switch on while pressing the Increment
Button (+), the Decrement Button (–) and the MENU
Button simultaneously, and enter to the Service Menu
mode.
8
Press the MENU Button once, and enter to the DEF
MENU.
8
The item of the DEF MENU changes as shown in Fig. 3-3.
Fig. 3-3
8
Press the MENU Button once, and enter to the W/B
MENU.
8
The item of the W/B MENU changes as shown in Fig. 3-4.
Fig. 3-4
8
Press the MENU Button once, and enter to the SUB
MENU.
8
The item of the SUB MENU changes as shown in Fig. 3-5
Fig. 3-5
8
Press the MENU Button once, and enter to the ADJ
MENU.
8
The ADJ MENU is as shown in Fig. 3-6.
Fig. 3-6
4. Adjustment Procedure
8
Refer to the Location of the Test Points and
Adjusting Controls on the page 8.
(1). 120V Adjustment
Test Point:
TP804 (120V)
CRT Board
Adjust:
+B
Increment Button (+)
Decrement Button (–)
SCREEN Control
Flyback Transformer on the Main Board
8
Supply the Monoscope Pattern signal to Video Input
Connector.
8
Connect the Digital Voltmeter to TP804.
8
Select the MENU Button to the DEF MENU.
8
Select the Cursor Buttons (
i
) or (
o
) to the +B position.
8
Adjust the Increment Button (+) or Decrement Button (–)
so that +B becomes 65.
8
Adjust the SCREEN control so that the stair step of the
Monoscope pattern is visibly certain.
8
Adjust the Increment Button (+) or Decrement Button (–)
so that the DC voltage at TP804 becomes 120 ± 0.2 V.
8
Supply the Grayscale signal to Video Input Connector.
8
Select the Cursor Buttons (
i
) or (
o
) to the ABL IN
position, and then the reference voltage is inputted to the
micro computer.
8
Select the MENU Button to the ADJ MENU.
8
Select the Cursor Buttons (
i
) or (
o
) to the MENU END
position.
8
Press the Increment Button (+) or Decrement Button (–)
for saving data.
8
Turn the Power Switch off.
1 STD BRIGHT
70
2 MAX CONTRAST
76
3 STD COLOUR
72
4 MAX AUDIO
163
Pressing
the Cursor Button (
the Cursor Button (
o
)
Pressing
the Cursor Button (
the Cursor Button (
i
)
ADJ MENU
ABL/ACL
ACL
ALL RESET
ON
MENU END
NO SAVE
1 CUTOFF R
0 197
2 CUTOFF G
78
3 CUTOFF B
0 124
4 DRIVE R
189
5 DRIVE B
112
6 SERVICE SW
OFF
Pressing
the Cursor Button (
the Cursor Button (
o
)
Pressing
the Cursor Button (
the Cursor Button (
i
)
1 H CENTER
9
2 +B
53
3 ABL IN
226
4 MENU SIZE
40
Pressing
the Cursor Button (
the Cursor Button (
o
)
Pressing
the Cursor Button (
the Cursor Button (
i
)
Click on the first or last page to see other WV-CM1020 service manuals if exist.