Read Panasonic WV-CL920 / WV-CL924 Service Manual online
– 1 –
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
<WV-CL920>
<WV-CL924>
WV-
CL920
FB
LOCK
FB
LOCK
Hi-Z G/L 75‰
WV-
CL920
VIDEO OUT
GEN-LOCK
120V AC 60Hz
VIDEO OUT
GEN-LOCK
AC 24V
IN
DC 12V
IN
GND
2
1
r
e
!3
!3
!2
!1
!2
q
w
!0
i
y
t
u
o
!4
!5
Slide the panel to the left until it locks.
q
Auto Iris Lens Connector (ALC Lens Connector)
This connector is used to connect the auto iris lens with a 4-
pin male connector supplied as a standard accessory (Part
No. YWM1943A).
pin male connector supplied as a standard accessory (Part
No. YWM1943A).
w
Flange-back Adjusting Ring (FB)
This ring is used to adjust the back focal length or picture
focus. Rotate this ring upward or downward for a CS-mount
lens. In case of using a C-mount lens, adjust it with the C-
mount adapter.
focus. Rotate this ring upward or downward for a CS-mount
lens. In case of using a C-mount lens, adjust it with the C-
mount adapter.
e
Focus Fixing Screw (LOCK)
r
Camera Mounting Screw Hole
This hole is used to mount the camera onto a mounting
bracket.
bracket.
t
Down Button (
)
This button is used to move the cursor downward. It is also
used to select items in the CAM SET UP menu.
used to select items in the CAM SET UP menu.
y
Right Button (
)
This button is used to move the cursor to the right. It is also
used to select the mode and can be used to adjust some
levels.
used to select the mode and can be used to adjust some
levels.
u
Left Button (
)
This button is used to move the cursor to the left. It is also
used to select the mode and can be used to adjust some
levels.
used to select the mode and can be used to adjust some
levels.
i
Up Button (
)
This button is used to move the cursor upward. It is also
used to select items in the CAM SET UP menu.
used to select items in the CAM SET UP menu.
o
Set Button (
)
This button is used to activate an item selected in the CAM
SET UP menu.
SET UP menu.
!0
Gen-lock Termination Switch (Hi-Z, G/L 75
Ω
)
Set this switch to Hi-Z when a gen-lock video input signal is
looped through. In all other cases, set this switch to 75
looped through. In all other cases, set this switch to 75
Ω
.
!1
Gen-lock Input Connector (GEN-LOCK)
This connector is used to connect an external system for
synchronization.
synchronization.
!2
Video Output Connector (VIDEO OUT)
This connector is used to connect with the VIDEO IN con-
nector of the monitor.
nector of the monitor.
!3
Power Cord Socket
This socket is used to connect the power cord (supplied as
a standard accessory).
a standard accessory).
!4
AC/DC Compatible Input Terminal
(DC 12V IN/AC 24V IN)
(DC 12V IN/AC 24V IN)
This terminal is for connecting the 12 V DC or 24 V AC
power supply cord.
power supply cord.
Caution:
Connect to 12 V DC (10.8 V-16 V) or 24 V AC
(19.5 V-28 V) class 2 power supply only. Make sure
to connect the grounding lead to the GND terminal
when the power is supplied from a 24 V AC power
source.
to connect the grounding lead to the GND terminal
when the power is supplied from a 24 V AC power
source.
Click on the first or last page to see other WV-CL920 / WV-CL924 service manuals if exist.