Read Panasonic WJ-SX155 Service Manual Simplified online
– 1-1 –
■
Front View
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
Matrix Switcher WJ-SX
OPERATE
OPERATE LED WILL BLINK
IF COOLING FAN MALFUNCTIONS
IF COOLING FAN MALFUNCTIONS
q
0
9
8
7
6
5
4
3
2
1
MODE
UNIT
RESET
w
e
r
1
ON
2 3 4
q
Operation indicator (OPERATE)
Lights up when the power of the unit is turned on.
Note: The indicator will blink to indicate rising tempera-
ture in the matrix switcher.
w
Reset button (RESET)
Resets and restarts the unit.
Note: The system configuration is not reset.
e
Unit number selector (UNIT)
Normally, set this selector to “0”.
When applying the master-slave connection, set this
selector to one of the following unit numbers.
When applying the master-slave connection, set this
selector to one of the following unit numbers.
Master/Slave
Unit number
Master
0
Slave 1
1
Slave 2
2
Slave 3
3
Slave 4
4
r
Mode selector (MODE)
Selects the unit's operation mode.
Normally, set all switches to OFF (NORMAL mode) as
shown in the figure.
Normally, set all switches to OFF (NORMAL mode) as
shown in the figure.
SX150A SOFTWARE UPLOAD:
Set the switches to this position when you update
the firmware of the unit.
the firmware of the unit.
MULTIPLEXER SOFTWARE UPLOAD:
This mode is reserved for future use.
1
ON
2 3 4
1
ON
2 3 4
1
ON
2 3 4
NORMAL
SX150
SOFTWARE UPLOAD
SOFTWARE UPLOAD
MULTIPLEXER
SOFTWARE UPLOAD
SOFTWARE UPLOAD
MODE SW SETUP
Click on the first or last page to see other WJ-SX155 service manuals if exist.