Read Panasonic VL-G201RU-N / VL-G201RU-S Service Manual online
5.2. INSTALLING THE DOOR STATION
Make sure to install the door station on a flat, vertical wall.
Important information:
On the bottom surface of the door station, there is a hole to allow water to drain. Do not cover it up when installing.
1. Unscrew the hex-head screw using the longer end of the allen
wrench and remove the mounting bracket from the rear of the door
station.
wrench and remove the mounting bracket from the rear of the door
station.
2. Attach the mounting bracket to the wall using the wood screws (3.8
mm × 20 mm).
mm × 20 mm).
•
•
•
•
Before drilling, see Standard installation position of the door
station and camera range for installation location (P.9).
station and camera range for installation location (P.9).
3. Connect the wires that connect to the monitor station to the terminal
by unscrewing the screws, pushing in the wires, then tightly fastening
the screws.
by unscrewing the screws, pushing in the wires, then tightly fastening
the screws.
•
•
•
•
See Power cable/wire type and distance for the wire type and
distance (P.10).
distance (P.10).
•
•
•
•
You can change the camera angle using the camera angle control
lever. See Standard installation position of the door station and
camera range for details (P.9).
lever. See Standard installation position of the door station and
camera range for details (P.9).
11
VL-G201RU-N / VL-G201RU-S
Click on the first or last page to see other VL-G201RU-N / VL-G201RU-S service manuals if exist.