BL-C210CE, BL-C210E - Panasonic Video Monitoring Service Manual (repair manual). Page 22

22

Prepare the following before connecting the Network Camera.

• Set up software (Setup CD-ROM)
• PC to fulfill the system requirements.
• Ethernet Router for LAN Connection.
• Ethernet cable (two pieces of Category 5 straight cable).

Your PC and network must meet the following technical specifications in order for the camera to function properly.

*1) What is IPv6?

・

IPv6 is short for “Internet Protocol Version 6”.

･

IPv6 was created to provide the additional IP addresses that will be needed as the Internet continues to expand.

･

IPv6 is expected to gradually replace IPv4, with the 2 coexisting for a number of years during a transition period.

･

Though most ISPs (Internet Service Providers) do not yet support IPv6, many local networks already use it. When your ISP

supports IPv6, your Panasonic Network Camera will be ready!
･

For more information, visit http://www.ipv6.org/.

Refer to the Panasonic Network Camera website at http://panasonic.net/pcc/support/netwkcam/ for details about network
environment.

Item

Requirement

Operating System

Microsoft® Windows Vista®, Windows® XP Service Pack 2 or later

CPU

3.2 GHz Pentium® 4 or faster (2.13 GHz Intel® Core™ 2 Duo or faster when viewing the multi cam-
era page)

RAM

512 MB or more; 1 GB or more recommended (1 GB or more recommended when viewing the multi 
camera page)

Video RAM

256 MB or more

Display

1024 x 768 resolution or higher

Protocol

For IPv4 Connection
TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ARP, ICMP)
For IPv6 Connection

TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ICMPv6, NDP)

Interface

10/100 Mbps network card

Web Browser

Internet Explorer® 6, Internet Explorer 7, Internet Explorer 8

Audio

PC speaker or headphones (required to use the Listen feature)

Additional Software (For Viewing
Buffered MPEG-4 Images)

For Windows Vista
Windows Media® Player 11 or later
For Windows XP
Windows Media Player 9 or later