Read Panasonic BL-C10CE / BL-C10E Service Manual online
7.2. CONNECT THE CAMERA TO
YOUR ROUTER
Connect the camera to your router with an Ethernet
®
cable
to set up the camera.
· These instructions assume your PC is already
· These instructions assume your PC is already
connected to the Internet and your home network
includes a router that is UPnP (Universal Plug and Play)
compliant.
includes a router that is UPnP (Universal Plug and Play)
compliant.
· The camera will be connected to your router using a
"straight" Cat5 network cable (customer provided).
1. Push the cable cover to the left, let go of the tab from
the unit, and pull it.
2. Connect the Ethernet cable to your router.
3. Connect the Ethernet cable to the camera.
7.3. TURN THE CAMERA ON
Inserting the AC adaptor to the outlet powers up the
camera.
camera.
1. Connect the power cord from the AC adaptor to the DC In
jack.
2. Connect the AC plug of the AC cord to the power outlet.
· Use only specified Panasonic AC adaptor.
Caution:
The AC cord is used as the main disconnect device,
ensure that the socket-outlet is located/ installed
near the equipment and is easily accessible.
ensure that the socket-outlet is located/ installed
near the equipment and is easily accessible.
3. After the lens moves (pan/tilt operation), confirm that the
indicator lights green after a minute.
· If the indicator does not light green, see page 16 and 17
· If the indicator does not light green, see page 16 and 17
of the Installation/Troubleshooting.
· A noise can be heard during pan/tilt operation. This is
normal.
4. After you let the Ethernet cable through the hole, attach the
cable cover to the camera.
19
BL-C10CE / BL-C10E
Click on the first or last page to see other BL-C10CE / BL-C10E service manuals if exist.