BB-HCM580CE (serv.man2) - Panasonic Video Monitoring Service Manual (repair manual). Page 4

4

There are several types of PbF solder available commercially. While this product is manufactured using Tin, Silver, and Copper,
(Sn+Ag+Cu), you can also use Tin and Copper, (Sn+Cu), or Tin, Zinc, and Bismuth, (Sn+Zn+Bi). Please check the manufacturer’s
specific instructions for the melting points of their products and any precautions for using their product with other materials. The fol-
lowing lead free (PbF) solder wire gauge are recommended for service of this product: 0.3mm, 0.6mm and 1.0mm.

• Repair service shall be provided in accordance with repair technology information such as service manual so as to pre-

vent fires, injury or electric shock, which can be caused by improper repair work.

1. When repair services are provided, neither the products nor their parts or members shall be remodeled. 
2. If a lead wire assembly is supplied as a repair part, the lead wire assembly shall be replaced. 
3. FASTON terminals shall be plugged straight in and unplugged straight out. 

• ICs and LSIs are vulnerable to static electricity.

1. Cover plastic parts boxes with aluminum foil.
2. Ground the soldering irons.
3. Use a conductive mat on worktable.
4. Do not grasp IC or LSI pins with bare fingers.

• Adobe and Acrobat are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or

other countries.

• Ethernet is a registered trademark of Xerox Corporation in the United States and/or other countries.
• Microsoft, Windows and Active X are either registered trademarks or trademarks of Microsoft Corporation in the United States

and/or other countries.

• Pentium is a registered trademark of Intel Corporation or its subsidiaries in the United States and other countries.
• Screen shots reprinted with permission from Microsoft Corporation.

All other trademarks identified herein are the property of their respective owners.