BB-HCM515CE - Panasonic Video Monitoring Service Manual (repair manual). Page 23

23

• The Setup Program starts. If the program does not start, double-click Setup.exe found 

on the CD-ROM.

• The program searches for cameras connected to your network.

If [Windows cannot open this file] is displayed after clicking [Manual]
[Select the program from a list]

[OK]

Check [Always use the selected program to open this 

kind of file]

[Browse]

Browse to [C:\WINDOWS\system32\mshta.exe]

[Open]

[OK]

• If the dialog is not displayed, continue to the next step.

• If you have more than one camera, you can distinguish cameras by model number, 

printed on the front of the camera, or by MAC address (see “Camera Diagram” on 
page 1 of the Installation Guide to find your camera’s MAC address label).

• If more than 20 minutes have passed since the selected camera was turned on, you 

cannot configure the camera. Turn off the camera, then turn it on again. This restriction 
does not apply to cameras which have not been configured yet or have been reset to 
their factory default settings.

• If you are using firewall or antivirus software on your PC, the Setup Program may not 

be able to find any cameras on your network. If you cannot disable your firewall or 
antivirus software, you can configure the camera by entering its MAC address (see 
“Camera Diagram” on page 1 of the Installation Guide to find your camera’s MAC 
address label).

• Do not forget the user name and password you set here, otherwise you will need to 

reset the camera and configure it again.

• If the following ActiveX  Controls dialog is displayed, click [Install ActiveX Control...].

• When the following Security Warning is displayed, click [Install].

• The camera image is displayed.

• [About this program]: Displays the 

program’s version information.

• [Search for Cameras]: Displays a list of 

cameras connected to your network.

• [Manual]: Allows you to view the included 

documentation. PDF versions of the printed 
documentation are included on the CD-
ROM; Adobe  Reader  is required to view 
them.

• [Update Firmware]: Allows you to use the 

Setup Program to update the camera’s 
firmware (built-in software).

• [Save Settings to PC/Save Settings to 

Camera]: Allows you to save a backup of 
all camera settings on your PC, or restore 
all settings in the camera using a backup 
file saved on your PC.

• [Network Camera Recorder Single 

Camera Version Installation]: Installs the 
[Network Camera Recorder Single Camera 
Version] software. (See “Installing the 
Network Camera Recorder Single Camera 
Version” on page 2.)

• [Exit]: Closes the screen and exits the 

Setup Program.

To assign all network settings to the camera 
manually, or to assign an IP address using the 
DHCP feature of your router, click [Network 
Settings], then select [Specify an IP Address] or 
[DHCP] and enter the appropriate settings.

If you are using a French, Simplified
Chinese, or Japanese language OS, this
screen will be displayed in the 
corresponding language, and all subsequent
camera screens will be displayed in that 
language.

The camera’s IP address is displayed. This is the 
IP address you must enter in your web browser to 
access the camera. Do not forget this address.

This will install the viewer program (ActiveX 
Controls) needed to display camera images 
properly. Viewer programs must be installed to 
view MPEG-4 images, MJPEG images, and to use 
audio features. 

Congratulations! You have successfully set up the 
camera and can now view camera images.